0
BQ76907-Q1
  • BQ76907-Q1
  • BQ76907-Q1

BQ76907-Q1

ACTIVE

Automotive, 7S low-power high-accuracy battery monitor and protector for LiFePO4 and supercapacitors

Texas Instruments BQ76907-Q1 Product Info

1 April 2026 14

Parameters

Rating

Automotive

Number of series cells (max)

7

Number of series cells (min)

2

Features

Digital output, I2C support, Integrated ADC, LDO output, Low-Power Sleep Mode, Low-side driver, Multi-cell support, One-time-programmable (OTP) memory, Open-wire detection, Overcurrent in charging protection, Overcurrent in discharging protection, Overtemperature protection, Overvoltage protection, Short-current detection, Sleep Mode, Temperature sensing, Undertemperature protection, Undervoltage protection

Vin (max) (V)

38.5

Communication interface

I2C

Device type

Cell monitor and balancer, Protector

Operating temperature range (°C)

-40 to 125

Battery overvoltage protection (min) (V)

0

Battery overvoltage protection (max) (V)

5.5

TI functional safety category

Functional Safety-Compliant

Operating current (typ) (µA)

140

Package

VQFN (RGR)-20-12.25 mm² 3.5 x 3.5

Features

  • AEC-Q100 Qualified for automotive applications
  • Battery and supercap monitoring capability for 2-series to 7-series cells
  • Integrated low-side drivers for NFET protection with optional autonomous recovery
  • Extensive protection suite including voltage, temperature, current, and internal diagnostics
  • 16-bit delta-sigma voltage ADC
    • High accuracy cell voltage measurement of 1mV (typical)
  • Dedicated 16- or 24-bit delta-sigma coulomb counter ADC
    • High-accuracy current measurement with low input offset error
    • Wide-range current applications (±200mV measurement range across sense resistor)
    • 48bit accumulated charge integrator with timer
  • Host-controlled cell balancing
  • Multiple power modes (typical battery pack operating range conditions)
    • NORMAL mode (with Coulomb counting): 32µA to 175µA
    • SLEEP mode (with protections active): 6µA
    • DEEPSLEEP mode: 2.7µA
    • SHUTDOWN mode: <1µA
  • Supply voltage from 3V to 38.5V
  • High-voltage tolerance of 45V on cell connect and select additional pins
  • Support for temperature sensing using an internal sensor and an external thermistor
  • Integrated one-time-programmable (OTP) memory for device settings, programmed by TI
  • 400kHz I2C serial communications with optional CRC support
  • Programmable LDO for external system usage
  • 20-pin QFN (RGR) package
  • AEC-Q100 Qualified for automotive applications
  • Battery and supercap monitoring capability for 2-series to 7-series cells
  • Integrated low-side drivers for NFET protection with optional autonomous recovery
  • Extensive protection suite including voltage, temperature, current, and internal diagnostics
  • 16-bit delta-sigma voltage ADC
    • High accuracy cell voltage measurement of 1mV (typical)
  • Dedicated 16- or 24-bit delta-sigma coulomb counter ADC
    • High-accuracy current measurement with low input offset error
    • Wide-range current applications (±200mV measurement range across sense resistor)
    • 48bit accumulated charge integrator with timer
  • Host-controlled cell balancing
  • Multiple power modes (typical battery pack operating range conditions)
    • NORMAL mode (with Coulomb counting): 32µA to 175µA
    • SLEEP mode (with protections active): 6µA
    • DEEPSLEEP mode: 2.7µA
    • SHUTDOWN mode: <1µA
  • Supply voltage from 3V to 38.5V
  • High-voltage tolerance of 45V on cell connect and select additional pins
  • Support for temperature sensing using an internal sensor and an external thermistor
  • Integrated one-time-programmable (OTP) memory for device settings, programmed by TI
  • 400kHz I2C serial communications with optional CRC support
  • Programmable LDO for external system usage
  • 20-pin QFN (RGR) package

Description

The Texas Instruments BQ76907-Q1 provides a highly integrated, high-accuracy battery monitor and protector for 2-series to 7-series Li-ion, Li-polymer, LiFePO4 (LFP), and LTO battery packs and supercaps. The device includes a high-accuracy monitoring system with a dedicated coulomb counter and accumulated charge integration, a highly configurable protection subsystem, and support for host-controlled cell balancing. Integration includes low-side protection NFET drivers, a programmable LDO for external system use, and an I2C host communication interface supporting up to 400kHz operation with optional CRC. Continuous Coulomb counting is available in multiple power modes ranging down to 32µA. The BQ76907-Q1 operates over a supply voltage from 3V to 38.5V and is available in a 20-pin QFN package.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request