0
S70KS1283GABHV023
  • S70KS1283GABHV023

S70KS1283GABHV023

Active and preferred

The S70KS1283GABHV023 is a 128 Mb HYPERRAM™ self-refresh DRAM (PSRAM) with Octal xSPI interface and 1.8 V-only operation (VCC 1.7 V to 2.0 V). It supports 200 MHz DDR transfers for up to 400 MBps bandwidth with 35 ns max access time. In a 24-ball FBGA package, it offers Hybrid Sleep, Deep Power Down, and partial array refresh for embedded RAM expansion in MCUs and SoCs with reduced standby power.

Infineon Technologies S70KS1283GABHV023 Product Info

16 April 2026 4

Parameters

Density

128 MBit

Family

KS-3

Initial Access Time

35 ns

Interface Bandwidth

400 MByte/s

Interface Frequency (SDR/DDR) (MHz)

- / 200

Interfaces

xSPI (Octal)

Lead Ball Finish

N/A

Operating Temperature range

-40 °C to 105 °C

Operating Voltage range

1.7 V to 2 V

Operating Voltage

1.8 V

Peak Reflow Temp

260 °C

Planned to be available until at least

See roadmap

Qualification

Industrial

Technology

HYPERRAM

Features

  • Octal xSPI interface
  • 1.7 V to 2.0 V VCC/VCCQ
  • 2.7 V to 3.6 V VCC/VCCQ
  • 200 MHz maximum clock rate
  • DDR on both clock edges
  • Throughput up to 400 MBps
  • 8-bit DQ[7:0] data bus
  • RWDS strobe and write data mask
  • Optional differential clock CK/CK#
  • Optional DCARS read strobe
  • Linear and wrapped burst modes
  • Hybrid Sleep and Deep Power Down

Description

  • Octal DDR boosts system bandwidth
  • 400 MBps supports fast frame buffers
  • 200 MHz fits high-speed controllers
  • 8-bit bus reduces signal routing
  • RWDS eases DDR timing margins
  • DCARS improves DDR read eye margin
  • Wrapped bursts reduce access latency
  • Burst modes match cache or streaming
  • Sleep/DPD lowers standby power
  • Partial refresh cuts idle refresh power
  • Dual-voltage fits 1.8 V or 3.0 V rails
  • RESET# enables quick fault recovery

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request