Analog Devices MAX7320 Product Info

• 400kHz, +5.5V-Tolerant I²C Serial Interface
• +1.71V to +5.5V Operating Voltage
• Eight Push-Pull Output Ports with Selectable Power-Up Logic States
• Active-Low RST Clears the Serial Interface, Terminating Any Serial Transaction to or from the MAX7320
• AD0 and AD2 Inputs Select from 16 Slave Addresses
• Low 0.6µA (typ) Standby Current
• -40°C to +125°C Temperature Range

The MAX7320 2-wire serial-interfaced peripheral features eight push-pull outputs with selectable power-up logic states.

The +5.5V tolerant active-low RST input clears the serial interface, terminating any I²C communication to or from the MAX7320.

The MAX7320 uses two address inputs with four-level logic to allow 16 I²C slave addresses. The slave address also determines the power-up state level for the outputs in groups of four ports.

The MAX7320 supports hot insertion. The serial interface SDA, SCL, AD0, AD2, and active-low RST remain high impedance in power-down (V+ = 0V) with up to +6V asserted on them.

The MAX7320 is one device in a family of pin-compatible port expanders with a choice of input ports, open-drain I/O ports, and push-pull output ports.

The MAX7320 is available in 16-pin QSOP and 16-pin TQFN packages, and is specified over the automotive temperature range (-40°C to +125°C).

Applications

• Cell Phones/PDAs
• Notebooks
• RAID
• Satellite Radios
• Servers