0
OUTLINE
  • Introduction

  • Quick L1154F Battery Equivalent Chart

  • What Is an L1154F Battery?

  • Is L1154F the Same as LR44?

  • L1154F vs AG13, A76, 76A and V13GA

  • Can SR44 or 357 Replace an L1154F Battery?

  • Batteries That Are Not Direct L1154F Replacements

  • Vinnic L1154F Battery Replacement

  • How to Choose the Right Replacement

  • Why a New LR44 May Not Work in an L1154F Device

  • How to Replace an L1154F Battery Safely

  • Frequently Asked Questions

  • Final thoughts

L1154F Battery Equivalent: LR44, AG13, A76 & 357 Compared

19 September 2026     By Ryan 13

Introduction

L1154F battery equivalent guide covering LR44, AG13, A76 and 357

An L1154F battery is usually a 1.5-volt alkaline button cell that fits the LR44 size. Common equivalents include LR44, AG13, A76, 76A, PX76A, and V13GA.

A silver-oxide SR44 or 357 battery is the same size and can work in many of the same devices, but it uses different chemistry and gives 1.55 volts. Batteries like CR2032, LR1130, LIR44, and PR44/675 are not direct replacements.


To be safe, check these four things before choosing a replacement:
  1. Physical dimensions
  2. Nominal voltage
  3. Battery chemistry
  4. The device manufacturer’s specified battery type

Quick L1154F Battery Equivalent Chart

The chart below shows which batteries are direct alkaline replacements, which are just the same size, and which ones look similar but aren’t compatible.


L1154F Alkaline 1.5 V 11.6 × 5.4 mm Original/reference battery
LR44 Alkaline 1.5 V 11.6 × 5.4 mm Direct replacement
AG13 Alkaline 1.5 V 11.6 × 5.4 mm Common direct replacement
A76 Alkaline 1.5 V 11.6 × 5.4 mm Direct replacement
76A / PX76A Alkaline 1.5 V 11.6 × 5.4 mm Direct replacement
V13GA Alkaline 1.5 V 11.6 × 5.4 mm Direct replacement
GP76A / GPA76 Alkaline 1.5 V Usually LR44 size Verify package specifications
G13A Alkaline 1.5 V Usually LR44 size Verify package specifications
SR44 / 357 Silver oxide 1.55 V 11.6 × 5.4 mm Same-size performance alternative
LIR44 Rechargeable lithium-ion About 3.6 V Similar size Not interchangeable
LR1130 Alkaline 1.5 V 11.6 × about 3.1 mm Too thin
CR2032 Lithium 3 V 20 × 3.2 mm Not compatible
PR44 / 675 Zinc-air About 1.4 V Similar size Not a universal substitute

A “direct replacement” matches the original battery’s size, voltage, and alkaline chemistry. A “same-size alternative” might fit, but it could have a different voltage or chemistry.

L1154F battery replacement chart showing direct, conditional and incompatible alternatives

What Is an L1154F Battery?

The L1154F is a small, non-rechargeable alkaline button battery used in compact electronics. Vinnic includes the L1154F in its alkaline manganese dioxide range, with manganese dioxide as the positive electrode and zinc as the negative electrode. Vinnic

L1154F specifications

Battery type Primary, non-rechargeable button cell
Chemistry Alkaline zinc–manganese dioxide
Nominal voltage 1.5 V
Diameter Approximately 11.6 mm
Height Approximately 5.4 mm
IEC size family LR44 / LR1154
Common applications Toys, calculators, laser pointers, small lights and compact electronics

Several major manufacturers support these dimensions. Energizer specifies its A76 as an IEC LR44 cell measuring approximately 11.6 mm in diameter and 5.4 mm in height. Energizer A76 datasheet: VARTA gives the same voltage and dimensions for its V13GA/LR44 battery.VARTA catalog


L1154F capacity is not one fixed number

Online guides often list capacities between about 110 and 175 mAh. These numbers can vary and aren’t necessarily in conflict.


Button-cell capacity depends on:
  1. Applied load
  2. Operating temperature
  3. Cutoff voltage
  4. Discharge pattern
  5. Manufacturer and production design

For example, Energizer lists a typical capacity of 175 mAh for its A76, but this is based on a specific test with a 0.9-volt cutoff. If you see a capacity number without test details, treat it as an estimate, not a guaranteed value.


What does the “F” in L1154F mean?

Some online sources claim the “F” stands for “flat” or a flat-bottom version. However, this isn’t clearly explained on the Vinnic product page or in major manufacturer specs reviewed here.
It’s best to think of L1154F as a manufacturer or commercial label for the LR44-size alkaline family. When choosing a replacement, focus on voltage, size, and chemistry instead of guessing what the suffix means.

Is L1154F the Same as LR44?

For normal replacement purposes, an L1154F and an alkaline LR44 are generally treated as the same battery type.


Both typically have:
  1. 1.5-volt nominal output
  2. Alkaline zinc–manganese dioxide chemistry
  3. Approximately 11.6 mm diameter
  4. Approximately 5.4 mm height
  5. Non-rechargeable construction


The main difference is the label on the battery. LR44 is the standard IEC name used by big brands, while L1154F is often found on batteries that come with toys, calculators, and other consumer products.

If your device originally uses a Vinnic L1154F, a good-quality LR44 is usually the best replacement to try first.


Why does an LR44 sometimes appear not to fit?

A properly made LR44 should be the same size, but sometimes a replacement feels loose or doesn’t make contact.


Possible reasons include:
  • A compressed or bent battery-compartment spring
  • Corrosion or dirt on the contacts
  • A plastic separator positioned incorrectly
  • Multiple cells stacked in the wrong order
  • A missing spacer or battery-retaining part
  • Differences in terminal shape within allowable manufacturing tolerances
  • An incorrectly labeled battery purchased from an unreliable source
  • Confusion between LR44 and the thinner LR1130
Don’t use metal foil or any homemade conductor to make a loose battery fit. This can cause a short circuit or bypass the device’s battery holder design.

L1154F vs AG13, A76, 76A and V13GA

Several names refer to this alkaline battery size, depending on the manufacturer and labeling system.


LR44

LR44 is the most helpful replacement name because it’s the official IEC label for this 1.5-volt alkaline size.

If your original battery says L1154F and you don’t have a replacement chart, LR44 is usually the best place to start.


AG13

AG13 is a widely used commercial designation for an LR44-size alkaline button cell. It is common on generic battery packaging and products manufactured in Asia.
Since AG labels can be inconsistent, especially from cheaper brands, make sure the package says:
  • 1.5 V
  • Alkaline
  • Approximately 11.6 × 5.4 mm
  • Non-rechargeable


Energizer A76

Energizer identifies A76 as an IEC LR44 alkaline battery. Its official datasheet specifies 1.5 volts and the same nominal dimensions as the L1154F size family.
So, A76 is the usual Energizer replacement for an L1154F battery.


Duracell 76A

Duracell markets its 1.5-volt alkaline version as 76A and lists LR44, A76 and PX76A as equivalents.Duracell 76A

So, 76A is the standard Duracell replacement for L1154F when your device needs an alkaline LR44-size battery.


VARTA V13GA

VARTA identifies V13GA as an IEC LR44 battery with:
  • 1.5-volt output
  • Alkaline chemistry
  • 11.6 mm diameter
  • 5.4 mm height

V13GA is also a direct alkaline replacement.


Other commercial codes

Labels like GP76A, GPA76, and G13A are often used for this size. Since commercial codes aren’t as strict as IEC names, always check the package details instead of relying on the code alone.

Can SR44 or 357 Replace an L1154F Battery?

SR44 and 357 batteries are the same size as L1154F or LR44, but their chemistry is different.


Chemistry Alkaline Silver oxide
Nominal voltage 1.5 V 1.55 V
Dimensions About 11.6 × 5.4 mm About 11.6 × 5.4 mm
Discharge behavior Voltage gradually declines Voltage remains flatter
Relative cost Lower Higher
Typical use General-purpose electronics Precision and voltage-sensitive devices

Renata specifies its 357/SR44 as a 1.55-volt silver-oxide battery measuring 11.6 × 5.4 mm.Renata 357 datasheet


When silver oxide may be preferable

A silver-oxide SR44 or 357 may provide better performance in devices that depend on stable voltage, including certain:
  • Watches
  • Digital calipers
  • Measurement instruments
  • Cameras and light meters
  • Medical or laboratory instruments


Always use the battery type recommended by the device maker, especially if you need accurate measurements or steady performance.


When alkaline is usually sufficient

An L1154F, LR44, AG13 or A76 is generally appropriate for cost-sensitive, general-purpose products such as:
  • Electronic toys
  • Calculators
  • Laser pointers
  • Miniature LED lights
  • Novelty products
  • Small alarms and timers

Don’t assume you need the most expensive battery. If your manual says LR44 or another alkaline type, a good-quality alkaline replacement is usually enough.

L1154F LR44 alkaline battery compared with SR44 357 silver oxide battery

Batteries That Are Not Direct L1154F Replacements

Batteries that look similar can differ in height, voltage, or chemistry.


CR2032

A CR2032 is a 3-volt lithium coin cell measuring approximately 20 mm in diameter. It is wider, thinner and operates at twice the nominal voltage of an L1154F.
It is not an L1154F replacement.

A homemade adapter won’t fix the voltage difference and could damage a device designed for 1.5 volts.


LR1130

The LR1130 has a similar diameter but is only about 3.1 mm high. An L1154F/LR44 is approximately 5.4 mm high.

An LR1130 might fall into the battery compartment and not make good contact. Don’t pick it just because the diameter looks right.


LIR44

LIR44 is usually a rechargeable lithium-ion battery with about 3.6 volts. It looks like an LR44, but its voltage is much too high for most devices that use L1154F.

Only use an LIR44 if your device’s manufacturer specifically says it’s okay.


PR44 or 675

PR44/675 batteries are commonly zinc-air cells. They are frequently used in hearing devices and operate at a lower nominal voltage than alkaline or silver-oxide cells.
Zinc-air batteries also rely on air entering the cell after you remove the sealing tab. Their operating characteristics differ substantially from those of an L1154F.

Don’t use these as universal L1154F replacements, even if they look similar.


Vinnic L1154F Battery Replacement

A Vinnic L1154F is an alkaline manganese button cell. If the original battery is difficult to find, look for a reputable replacement marked:
  • LR44
  • A76
  • AG13
  • 76A
  • PX76A
  • V13GA


Make sure the replacement says 1.5 volts and alkaline chemistry.

You don’t need to find a battery with the exact Vinnic L1154F label. What’s important is that the replacement matches the battery type and is approved by your device’s manufacturer.

If your device uses two or three L1154F batteries, replace them all at once. Mixing new and used batteries can cause uneven voltage and shorten battery life.


Avoid mixing:
  • Different chemistries
  • Different brands
  • Old and new cells
  • Batteries from unidentified suppliers

How to Choose the Right Replacement

The right battery depends on how sensitive your device is to voltage changes.


Toys LR44, AG13 or A76 Economical alkaline option
Calculators LR44 or A76 Usually tolerant of gradual voltage decline
Laser pointers LR44 or AG13 Common general-purpose choice
Small LED devices LR44 or A76 Confirm number of cells required
Watches Check the manual; SR44/357 may be specified Stable voltage may affect operation
Digital calipers Follow the manufacturer specification Silver oxide may provide steadier readings
Cameras and meters Use the specified chemistry Circuit sensitivity varies
Medical equipment Use only the specified battery Accuracy and compliance may depend on it

For sensitive equipment, don’t pick a replacement just because it fits. Check your device manual or the label inside the battery compartment first.

Why a New LR44 May Not Work in an L1154F Device

If a replacement battery doesn’t power your device, it doesn’t always mean it’s the wrong type. Try these steps to find out why.


1. Confirm polarity

The broad face marked with a plus sign is the positive terminal. Match it to the polarity symbol inside the battery compartment.

A reversed cell will prevent most devices from operating.


2. Count the required batteries

Many toys and novelty products use two or three button cells stacked together. Confirm you install the correct number.

Three 1.5-volt cells in series produce a nominal 4.5 volts. Leaving one cell out prevents proper contact and reduces the total voltage.


3. Check separators and retainers

Some devices use a plastic separator or shaped battery holder. Reinstall it in the same position as the original.

A misplaced separator can stop adjacent cells from making contact.


4. Inspect the metal contacts

Look for:
  • Flattened springs
  • Bent contact tabs
  • White or green corrosion
  • Dirt or adhesive residue
  • Leakage from the previous battery

Don’t scrape the contacts too hard. If the compartment is badly corroded or damaged, your device might need repair.


5. Confirm the replacement is actually LR44 size

Check the package for 11.6 × 5.4 mm. A thinner LR1130 can look nearly identical from above but may not reach both contacts.


6. Remove protective stickers

Some button batteries or battery holders have insulating pull tabs. Confirm that you've removed all shipping tabs and protective films.


7. Replace the entire set

If your device uses more than one battery, replace all of them with new, matching ones. A single weak battery can stop the device from working.


8. Test under load when possible

A battery might show a normal voltage when not in use but still work poorly once installed. Checking voltage alone isn’t always enough to know whether it will power your device.


9. Check the device manual

If your device originally used a silver-oxide battery, swapping it for an alkaline one may shorten battery life or reduce stability, even if it fits.

LR44 replacement troubleshooting steps for an L1154F battery device

How to Replace an L1154F Battery Safely

  1. Turn off the device.
  2. Note the original battery's orientation.
  3. Remove the old battery without bending the contacts.
  4. Inspect the compartment for leakage or corrosion.
  5. Install a fresh battery with the correct polarity.
  6. Replace all cells together if the device uses a stack.
  7. Secure the battery-compartment cover.
  8. Test the device before returning it to service.


Never try to recharge an L1154F, LR44, AG13, or A76 unless it clearly says it’s rechargeable. Regular alkaline button cells are not meant to be recharged.

Don’t expose the battery to fire, crush it, short the terminals, or store it loose with metal objects.


Button batteries present a serious ingestion risk. The U.S. Consumer Product Safety Commission advises keeping loose cells away from children and seeking immediate medical help if a battery may have been swallowed. The CPSC also recommends covering the terminals of removed cells with non-conductive tape before disposal at an appropriate battery-collection facility. CPSC button-battery guidance

Frequently Asked Questions

Is L1154F the same as LR44?

L1154F and an alkaline LR44 normally refer to the same 1.5-volt, 11.6 × 5.4 mm battery size family. LR44 is the more widely recognized IEC designation.


What Energizer battery replaces L1154F?

Energizer A76 is the standard replacement. Energizer identifies A76 as an IEC LR44 1.5-volt alkaline cell.


What Duracell battery replaces L1154F?

Duracell 76A is the normal alkaline replacement. Duracell lists 76A as equivalent to LR44, A76 and PX76A.


Can I use AG13 instead of L1154F?

Yes, if the AG13 package confirms that it is a 1.5-volt alkaline cell measuring approximately 11.6 × 5.4 mm.


Can I use a 357 battery instead of L1154F?

A 357/SR44 has the same nominal dimensions but uses 1.55-volt silver-oxide chemistry. It works in many devices that accept the LR44 size, but check the device specifications first.


Is an L1154F battery rechargeable?

No. A standard L1154F is a primary alkaline battery and must not be recharged.


Is CR2032 an L1154F equivalent?

No. A CR2032 is a 3-volt lithium cell with a 20 mm diameter. It differs in size, voltage and chemistry.


Why does my LR44 replacement not make contact?

Common causes include a thinner battery being mistaken for an LR44, a compressed spring, dirty contacts, an incorrectly positioned separator or an incomplete stack of batteries.


How many volts is an L1154F battery?

A standard alkaline L1154F has a nominal voltage of 1.5 volts.


Which side of an L1154F is positive?

The broad face marked with a plus sign is positive. Follow the polarity markings in the device because battery-holder designs vary.


Final thoughts

For most devices, the best replacement for an L1154F battery is an alkaline LR44, AG13, A76, 76A, PX76A, or V13GA.
Use an SR44 or 357 only if your device supports silver-oxide batteries or needs their stable voltage. Don’t use CR2032, LR1130, LIR44, or PR44/675 just because they look similar.
Before you order, check the original battery label, your device manual, voltage, chemistry, and size. These details are more reliable than just matching a commercial code.
Need help finding the right L1154F replacement or buying button cells in bulk? Send Welllinkchips your battery label, device model, and how many you need for a compatibility and sourcing check.


About Ryan

Ryan is an Electronic Engineer at Welllinkchips with 12+ years of industry experience. He writes clear, practical resources that help engineering and procurement teams evaluate component specifications, circuit performance, reliability, lifecycle risk, and supplier considerations.

His work is intended to support informed design and purchasing decisions for active, obsolete, and hard-to-source electronic components.

Areas of focus

· Electronic circuit design and component selection

· Obsolete and end-of-life component risk

· Supplier verification and counterfeit-risk reduction

· Component alternatives and BOM continuity

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request