0
UC2842AQ
  • UC2842AQ
  • UC2842AQ

UC2842AQ

ACTIVE

30-V, 1-A, automotive 500KHz current mode PWM controller with 16V/10V UVLO 100% duty cycle

Texas Instruments UC2842AQ Product Info

1 April 2026 4

Parameters

Topology

Boost, Flyback, Forward

Control mode

Current

Features

Adjustable switching frequency, Current limiting, Dead time control, Error amplifier, Fixed frequency, Multi-topology

Duty cycle (max) (%)

100

Package

SOIC (D)-8-29.4 mm² 4.9 x 6

Features

  • Extended temperature performance of –40°C to 125°C
  • Optimized for off-line and dc to dc converters
  • Low start up current (<0.5mA)
  • Trimmed oscillator discharge current
  • Automatic feed forward compensation
  • Pulse-by-pulse current limiting
  • Enhanced load response characteristics
  • Under-voltage lockout with hysteresis
  • Double pulse suppression
  • High current totem pole output
  • Internally trimmed bandgap reference
  • 500kHz operation
  • Low ro error amp
  • Extended temperature performance of –40°C to 125°C
  • Optimized for off-line and dc to dc converters
  • Low start up current (<0.5mA)
  • Trimmed oscillator discharge current
  • Automatic feed forward compensation
  • Pulse-by-pulse current limiting
  • Enhanced load response characteristics
  • Under-voltage lockout with hysteresis
  • Double pulse suppression
  • High current totem pole output
  • Internally trimmed bandgap reference
  • 500kHz operation
  • Low ro error amp

Description

The UC2842A/3A/4A/5A family of control ICs is a pin for pin compatible improved version of the UC2842/3/4/5 family. Providing the necessary features to control current mode switched mode power supplies, this family has the following improved features. Start up current is designed to be less than 0.5mA. Oscillator discharge is trimmed to 8.3mA. During under voltage lockout, the output stage can sink at least 10mA at less than 1.2V for VCC over 5V.

The difference between members of this family are shown in the table below.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request