0
DRV8262-Q1
  • DRV8262-Q1
  • DRV8262-Q1
  • DRV8262-Q1
  • DRV8262-Q1

DRV8262-Q1

ACTIVE

Automotive 70-V, 20A single or dual H-bridge motor driver with integrated current sensing

Texas Instruments DRV8262-Q1 Product Info

1 April 2026 7

Parameters

Number of full bridges

2

Vs (min) (V)

4.5

Vs ABS (max) (V)

70

Peak output current (A)

10

RDS(ON) (HS + LS) (mΩ)

100

Sleep current (µA)

2

Control mode

PH/EN, PWM

Control interface

Hardware (GPIO)

Features

Current Regulation, Current sense Amplifier, Integrated Current Sensing, Low-Power Sleep Mode

Topology

Integrated FET

Rating

Automotive

Operating temperature range (°C)

-40 to 125

Package

HTSSOP (DDW)-44-113.4 mm² 14 x 8.1

Features

  • AEC-Q100 Qualified for Automotive
    • Temperature grade 1: –40°C to +125°C, TA
  • Functional Safety-Capable
    • Documentation available to aid functional safety system design
    • Single or dual H-bridge motor driver
    • Drives One or two brushed-DC motors
    • One stepper motor
    • One or two thermoelectric coolers (TEC)
  • 4.5V to 60V operating supply voltage range
  • Low RDS(ON):
    • 100mΩ HS + LS (Dual H-Bridge)
    • 50mΩ HS + LS (Single H-Bridge)
  • High output current capability:
    • Dual H-Bridge (24V, 25 °C): 8A peak
    • Single H-Bridge (24V, 25 °C): 16A peak
  • Programmable interface of operation -
    • Phase/Enable (PH/EN)
    • PWM (IN/IN)
  • Integrated current sense and regulation
    • Current sensing for high-side MOSFETs
    • Sense output (IPROPI) for each H-bridge
    • ± 4 % sense accuracy at maximum current
  • Separate logic supply voltage (VCC)
  • Configurable off-Time PWM chopping
    • 7, 16, 24 or 32µs
  • Programmable fault recovery method

  • Supports 1.8V, 3.3V, 5.0V logic inputs
  • Low-current sleep mode (3µA)
  • Protection features
    • VM undervoltage lockout (UVLO)
    • Charge pump undervoltage (CPUV)
    • Overcurrent protection (OCP)
    • Thermal shutdown (OTSD)
    • Fault condition output (nFAULT)
  • AEC-Q100 Qualified for Automotive
    • Temperature grade 1: –40°C to +125°C, TA
  • Functional Safety-Capable
    • Documentation available to aid functional safety system design
    • Single or dual H-bridge motor driver
    • Drives One or two brushed-DC motors
    • One stepper motor
    • One or two thermoelectric coolers (TEC)
  • 4.5V to 60V operating supply voltage range
  • Low RDS(ON):
    • 100mΩ HS + LS (Dual H-Bridge)
    • 50mΩ HS + LS (Single H-Bridge)
  • High output current capability:
    • Dual H-Bridge (24V, 25 °C): 8A peak
    • Single H-Bridge (24V, 25 °C): 16A peak
  • Programmable interface of operation -
    • Phase/Enable (PH/EN)
    • PWM (IN/IN)
  • Integrated current sense and regulation
    • Current sensing for high-side MOSFETs
    • Sense output (IPROPI) for each H-bridge
    • ± 4 % sense accuracy at maximum current
  • Separate logic supply voltage (VCC)
  • Configurable off-Time PWM chopping
    • 7, 16, 24 or 32µs
  • Programmable fault recovery method

  • Supports 1.8V, 3.3V, 5.0V logic inputs
  • Low-current sleep mode (3µA)
  • Protection features
    • VM undervoltage lockout (UVLO)
    • Charge pump undervoltage (CPUV)
    • Overcurrent protection (OCP)
    • Thermal shutdown (OTSD)
    • Fault condition output (nFAULT)

Description

The DRV8262-Q1 is a wide-voltage, high-power, H-bridge motor driver for 24V and 48V automotive applications. The device integrates two H-bridges to drive one or two DC motors or a bipolar stepper motor. The DRV8262-Q1 supports up to 8A peak current in the dual H-bridge mode and up to 16A peak current in the single H-bridge mode. The device also integrates current sensing and regulation, current sense output and protection circuitry.

Integrated current sensing across the high-side MOSFETs allows the driver to regulate the motor current during startup and high load events. A current limit can be set with an adjustable external voltage reference. The device also provides output current proportional to the motor current for each H-bridge. Integrated sensing removes the need for shunt resistors, reducing board area and system cost.

A low-power sleep mode is provided to achieve ultra- low quiescent current. Internal protection features are provided for supply undervoltage lockout (UVLO), charge pump undervoltage (CPUV), output over current (OCP), and device overtemperature (OTSD).

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request