0
TPS65216
  • TPS65216
  • TPS65216

TPS65216

ACTIVE

Integrated power management (PMIC) for ARM® Cortex™-A8/A9 SOCs and FPGAs

Texas Instruments TPS65216 Product Info

1 April 2026 3

Parameters

Processor supplier

Texas Instruments

Processor name

Sitara AM335x, Sitara AM43x, Sitara AMIC110, Sitara AMIC120

Product type

Processor and FPGA

Regulated outputs (#)

5

Step-down DC/DC converter

4

Step-up DC/DC converter

0

LDO

1

Vin (min) (V)

1.8

Vin (max) (V)

5.5

Vout (min) (V)

-0.3

Vout (max) (V)

7

Iout (max) (A)

1.8

Configurability

Factory programmable, Software configurable

Features

Dynamic voltage scaling, Eco-mode, I2C control, Overcurrent protection, Power good, Power sequencing, Power supply and system monitoring, Thermal shutdown, UVLO adjustable

Rating

Catalog

Operating temperature range (°C)

-40 to 105

Step-down DC/DC controller

0

Step-up DC/DC controller

0

Iq (typ) (mA)

0.22

Switching frequency (max) (kHz)

2400

Shutdown current (ISD) (typ) (µA)

5

Switching frequency (typ) (kHz)

2400

Package

VQFN (RSL)-48-36 mm² 6 x 6

Features

  • Three adjustable step-down converters with integrated switching FETs (DCDC1, DCDC2, and DCDC3):
    • DCDC1: 1.1V default, up to 1.8A
    • DCDC2: 1.1V default, up to 1.8A
    • DCDC3: 1.1V default, up to 1.8A
    • VIN range from 3.6V to 5.5V
    • Adjustable output voltage range 0.85V to 1.675V (DCDC1 and DCDC2)
    • Adjustable output voltage range 0.9V to 3.4V (DCDC3)
    • Power save mode at light load current
    • 100% duty cycle for lowest dropout
    • Active output-discharge when disabled
  • One adjustable buck-boost converter with integrated switching FETs (DCDC4):
    • DCDC4: 3.3V default, up to 1.6A
    • VIN range from 3.6V to 5.5V
    • Adjustable output voltage range from 1.175V to 3.4V
    • Active output-discharge when disabled
  • Adjustable general-purpose LDO (LDO1)
    • LDO1: default up to 400mA
    • VIN range from 1.8V to 5.5V
    • Adjustable output voltage range from 0.9V to 3.4V
    • Active output-discharge when disabled
  • High-voltage load switch (LS) With 100mA or 500mA selectable current limit
    • VIN range from 1.8V to 10V
    • 500mΩ (max) switch impedance
  • Supervisor with built-in supervisor function monitors
    • DCDC1, DCDC2 ±4% tolerance
    • DCDC3, DCDC4 ±5% tolerance
    • LDO1 ±5% tolerance
  • Protection, diagnostics, and control:
    • Undervoltage lockout (UVLO)
    • Always-on push-button monitor
    • Overtemperature warning and shutdown
    • I2C interface (address 0x24) (see Timing Requirements for I2C operation at 400kHz)
  • Three adjustable step-down converters with integrated switching FETs (DCDC1, DCDC2, and DCDC3):
    • DCDC1: 1.1V default, up to 1.8A
    • DCDC2: 1.1V default, up to 1.8A
    • DCDC3: 1.1V default, up to 1.8A
    • VIN range from 3.6V to 5.5V
    • Adjustable output voltage range 0.85V to 1.675V (DCDC1 and DCDC2)
    • Adjustable output voltage range 0.9V to 3.4V (DCDC3)
    • Power save mode at light load current
    • 100% duty cycle for lowest dropout
    • Active output-discharge when disabled
  • One adjustable buck-boost converter with integrated switching FETs (DCDC4):
    • DCDC4: 3.3V default, up to 1.6A
    • VIN range from 3.6V to 5.5V
    • Adjustable output voltage range from 1.175V to 3.4V
    • Active output-discharge when disabled
  • Adjustable general-purpose LDO (LDO1)
    • LDO1: default up to 400mA
    • VIN range from 1.8V to 5.5V
    • Adjustable output voltage range from 0.9V to 3.4V
    • Active output-discharge when disabled
  • High-voltage load switch (LS) With 100mA or 500mA selectable current limit
    • VIN range from 1.8V to 10V
    • 500mΩ (max) switch impedance
  • Supervisor with built-in supervisor function monitors
    • DCDC1, DCDC2 ±4% tolerance
    • DCDC3, DCDC4 ±5% tolerance
    • LDO1 ±5% tolerance
  • Protection, diagnostics, and control:
    • Undervoltage lockout (UVLO)
    • Always-on push-button monitor
    • Overtemperature warning and shutdown
    • I2C interface (address 0x24) (see Timing Requirements for I2C operation at 400kHz)

Description

The TPS65216 is a single chip, power-management IC (PMIC) specifically designed to support the AMIC110, AMIC120, AM335x, and AM437x line of processors in line-powered (5V) applications. The device is characterized across a –40°C to +105°C temperature range, making it suitable for various industrial applications.

The TPS65216 is specifically designed to provide power management for all the functionalities of the AMIC110, AMIC120, AM335x, and AM437x. The DC/DC converters DCDC1 through DCDC4 are intended to power the core, MPU, DDR memory, and 3.3V analog and I/O, respectively. LDO1 provides the 1.8V analog and I/O for the processor. GPIO2 allows for warm reset of the DCDC1 and DCDC2 converters. The I2C interface allows the user to enable and disable all voltage regulators, the load switch, and GPIOs. Additionally, UVLO and supervisor voltage thresholds, power-up sequence, and power-down sequence can be programmed through I2C. Interrupts for overtemperature, overcurrent, and undervoltage can be monitored as well. The supervisor monitors DCDC1 through DCDC4 and LDO1. The supervisor has two settings, one for typical undervoltage tolerance (STRICT = 0b), and one for tight undervoltage and overvoltage tolerances (STRICT = 1b). A power-good signal indicates proper regulation of the five voltage regulators.

The TPS65216 device is available in a 48-pin VQFN package (6mm × 6mm, 0.4mm pitch).

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request