0
TPS25984
  • TPS25984
  • TPS25984
  • TPS25984

TPS25984

ACTIVE

4.5-V to 16-V, 0.8-mΩ 70-A stackable eFuse with accurate and fast current monitor

Texas Instruments TPS25984 Product Info

1 April 2026 8

Parameters

Vabsmax_cont (V)

20

Vin (max) (V)

16

Vin (min) (V)

4.5

Current limit (max) (A)

55

Current limit (min) (A)

10

Features

Adjustable OVLO, Adjustable soft start, Current monitoring, Fault output, Overcurrent protection, Overvoltage protection, Power good signal, Short-circuit protection, Stackable, Thermal shutdown, adjustable UVLO

Overcurrent response

Circuit breaker

Fault response

Auto-retry, Latch-off

Ron (typ) (mΩ)

0.8

Overvoltage response

Cut-off

Rating

Catalog

Soft start

Adjustable

Quiescent current (Iq) (typ) (A)

0.0004

Quiescent current (Iq) (max) (A)

0.00055

Device type

eFuses and hot swap controllers

Operating temperature range (°C)

-40 to 125

Package

WQFN-FCRLF (RZJ)-32-25 mm² 5 x 5

Features

  • Input operating voltage range: 4.5V to 16V
    • Absolute maximum: 20V
    • Withstands 23.5V for 10µs
    • Withstands negative voltages up to –1V at output
  • Integrated FET with ultra-low on-resistance: 0.8mΩ (typical)
  • Rated for RMS current of 55A and peak current of 70A
  • Supports parallel connection of multiple eFuses for higher current support
    • Active device state synchronization and load sharing during start-up and steady-state
  • Robust overcurrent protection
    • Adjustable overcurrent threshold (IOCP): 10A to 55A with accuracy of ±5%
    • Circuit-breaker response during steady state operation with adjustable transient overcurrent timer (ITIMER) to support peak currents up to 2 × IOCP
    • Adjustable active current limit during start-up (ILIM)
  • Robust short-circuit protection
    • Fast-trip response (< 200ns) to output short-circuit events
    • Adjustable threshold (2 × IOCP)
    • Immune to supply line transients — no nuisance tripping
  • Precise analog load current monitoring
    • Accuracy: ±1.4%
    • Bandwidth: >500kHz
  • Fast overvoltage protection (fixed 16.7V threshold)
  • Adjustable output slew rate control (dVdt) for inrush current protection
  • Active high enable input with adjustable undervoltage lockout (UVLO)
  • Overtemperature protection (OTP) to ensure FET SOA
    • FET SOA: 10W√s
  • Integrated FET health monitoring and reporting
  • Analog die temperature monitor output (TEMP)
  • Dedicated fault indication pin (FLT)
  • Power-Good indication pin (PG)
  • Small footprint: QFN 5mm × 5mm
  • 100% Pb free
  • Input operating voltage range: 4.5V to 16V
    • Absolute maximum: 20V
    • Withstands 23.5V for 10µs
    • Withstands negative voltages up to –1V at output
  • Integrated FET with ultra-low on-resistance: 0.8mΩ (typical)
  • Rated for RMS current of 55A and peak current of 70A
  • Supports parallel connection of multiple eFuses for higher current support
    • Active device state synchronization and load sharing during start-up and steady-state
  • Robust overcurrent protection
    • Adjustable overcurrent threshold (IOCP): 10A to 55A with accuracy of ±5%
    • Circuit-breaker response during steady state operation with adjustable transient overcurrent timer (ITIMER) to support peak currents up to 2 × IOCP
    • Adjustable active current limit during start-up (ILIM)
  • Robust short-circuit protection
    • Fast-trip response (< 200ns) to output short-circuit events
    • Adjustable threshold (2 × IOCP)
    • Immune to supply line transients — no nuisance tripping
  • Precise analog load current monitoring
    • Accuracy: ±1.4%
    • Bandwidth: >500kHz
  • Fast overvoltage protection (fixed 16.7V threshold)
  • Adjustable output slew rate control (dVdt) for inrush current protection
  • Active high enable input with adjustable undervoltage lockout (UVLO)
  • Overtemperature protection (OTP) to ensure FET SOA
    • FET SOA: 10W√s
  • Integrated FET health monitoring and reporting
  • Analog die temperature monitor output (TEMP)
  • Dedicated fault indication pin (FLT)
  • Power-Good indication pin (PG)
  • Small footprint: QFN 5mm × 5mm
  • 100% Pb free

Description

The TPS25984x is an integrated, high-current circuit protection and power management solution in a small package. The device provides multiple protection modes using very few external components and is a robust defense against overloads, short circuits, and excessive inrush current.

Applications with particular inrush current requirements can set the output slew rate with a single external capacitor. Output current limit level can be set by user as per system needs. A user adjustable overcurrent blanking timer allows systems to support transient peaks in the load current without tripping the eFuse.

Multiple TPS25984x devices can be connected in parallel to increase the total current capacity for high power systems. All devices actively synchronize their operating state and share current during start-up as well as steady state to avoid over-stressing some of the devices which can result in premature or partial shutdown of the parallel chain.

An integrated fast and accurate sense analog load current monitor facilitates predictive maintenance and advanced dynamic platform power management techniques such as Intel PSYS and PROCHOT™ to maximize system throughput and power supply utilization.

The devices are characterized for operation over a junction temperature range of –40°C to +125°C.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request