0
TPS1HC08-Q1
  • TPS1HC08-Q1
  • TPS1HC08-Q1

TPS1HC08-Q1

ACTIVE

Automotive, 9.7mΩ, 10A single-channel smart high-side switch

Texas Instruments TPS1HC08-Q1 Product Info

1 April 2026 11

Parameters

Number of channels

1

Rating

Automotive

Operating voltage (max) (V)

28

Operating voltage (min) (V)

3

Ron (typ) (mΩ)

9.8

Imax (A)

10

Current limit (max) (A)

25

Current limit (min) (A)

10

Current limit type

Adjustable

FET

Internal

Features

Current sense/monitor, Thermal shutdown, Under voltage lock out

Current sense accuracy

+/-5% @ 1A

Operating temperature range (°C)

-40 to 125

Function

Adjustable current limit, Automotive load dump compatibility, Current monitoring, Inductive load compatibility, Inrush current control, Short circuit protection, Thermal shutdown

Package

VQFN-HR (VAH)-11-7.92 mm² 2.2 x 3.6

Features

  • Single-Channel smart high-side switch with full diagnostics
    • Control using GPIO pins
    • Open-drain status output
    • Current sense analog output: sense accuracy <±5% at ≥ 2A
  • Wide operating voltage: 3V to 28V
  • Low RON: 9.8mΩ typical, 16.5mΩ max at 150°C
  • Ultra-low standby current: <1.4µA at 85°C
  • Adjustable current limit with and without thermal regulation
    • Current limit range: 10A to 25A
  • Protection
    • Overload and short-circuit protection
    • Undervoltage lockout (UVLO)
    • Thermal shutdown and swing with self recovery
    • Integrated output clamp to demagnetize inductive loads
    • Loss-of-GND, loss-of-battery, and reverse battery protection
  • Diagnostics
    • Global fault report for fast interrupt
    • Overcurrent and short-to-ground detection
    • Open-load and short-to-battery detection
  • Qualified for automotive applications
    • AEC-Q100 qualified with the following results:
      • Temperature grade 1: –40°C to 125°C ambient operating temperature range
    • Passed electrical transient disturbance immunity tests (ISO7637-2 and ISO16750-2)
  • Small footprint: 11-pin wettable flank VQFN-HR 2.2mm x 3.6mm, 0.55mm pitch
  • Functional Safety Capable
  • Single-Channel smart high-side switch with full diagnostics
    • Control using GPIO pins
    • Open-drain status output
    • Current sense analog output: sense accuracy <±5% at ≥ 2A
  • Wide operating voltage: 3V to 28V
  • Low RON: 9.8mΩ typical, 16.5mΩ max at 150°C
  • Ultra-low standby current: <1.4µA at 85°C
  • Adjustable current limit with and without thermal regulation
    • Current limit range: 10A to 25A
  • Protection
    • Overload and short-circuit protection
    • Undervoltage lockout (UVLO)
    • Thermal shutdown and swing with self recovery
    • Integrated output clamp to demagnetize inductive loads
    • Loss-of-GND, loss-of-battery, and reverse battery protection
  • Diagnostics
    • Global fault report for fast interrupt
    • Overcurrent and short-to-ground detection
    • Open-load and short-to-battery detection
  • Qualified for automotive applications
    • AEC-Q100 qualified with the following results:
      • Temperature grade 1: –40°C to 125°C ambient operating temperature range
    • Passed electrical transient disturbance immunity tests (ISO7637-2 and ISO16750-2)
  • Small footprint: 11-pin wettable flank VQFN-HR 2.2mm x 3.6mm, 0.55mm pitch
  • Functional Safety Capable

Description

TPS1HC08-Q1 is a single-channel, smart high-side switch, with integrated NMOS power FET and charge pump, designed for 12V automotive battery systems. The low on-resistance (9.8mΩ) minimizes device power dissipation when driving a wide range of output load current up to 10A DC.

The device integrates protection features such as thermal shutdown, output clamp, and current limit. TPS1HC08-Q1 implements an adjustable current limiting circuit that improves the reliability of the system by reducing inrush current when driving large capacitive loads and minimizing overload current. The adjustable current limit can be adjusted from (10A to 25A) using an external resistor on the ILIM pin. The device offers both thermal-regulated current limiting for capacitive loads at startup and non-regulated current limiting for motor inrush or bulb applications.

The device also provides an accurate current sense that allows for improved load diagnostics such as overload and open-load detection, enabling better predictive maintenance. TPS1HC08-Q1 is available in a 11-pin, 2.2mm x 3.6mmVQFN-HR wettable-flank package with 0.55mm pitch, minimizing the PCB footprint.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request