0
TPS1663
  • TPS1663
  • TPS1663
  • TPS1663
  • TPS1663
  • TPS1663
  • TPS1663

TPS1663

ACTIVE

4.5-V to 60-V, 31mΩ, 0.6-6A eFuse with output power limiting

Texas Instruments TPS1663 Product Info

1 April 2026 20

Parameters

Vabsmax_cont (V)

67

Vin (max) (V)

60

Vin (min) (V)

4.5

Current limit (max) (A)

6

Current limit (min) (A)

0.6

Features

Adjustable current limit, Adjustable soft start, Current monitoring, Fault output, Output power limiting, Overcurrent protection, Overvoltage protection, Power good signal, Short-circuit protection, Thermal shutdown

UL recognition

IEC62368, UL2367

Overcurrent response

Circuit breaker, Current limiting

Fault response

Auto-retry, Latch-off

Ron (typ) (mΩ)

31

Overvoltage response

Clamp, Cut-off

Rating

Catalog

Soft start

Adjustable

Quiescent current (Iq) (typ) (A)

0.00138

Quiescent current (Iq) (max) (A)

0.0017

Device type

eFuses and hot swap controllers

TI functional safety category

Functional Safety-Capable

Operating temperature range (°C)

-40 to 125

Package

HTSSOP (PWP)-20-41.6 mm² 6.5 x 6.4

Features

  • 4.5-V to 60-V operating voltage, 67-V absolute maximum
  • Integrated 60-V, 31-mΩ RON hot-swap FET
  • 0.6-A to 6-A adjustable current limit (±7%)
  • Low quiescent current, 21 µA in shutdown
  • Adjustable output power limiting (TPS16632 only) (±6%)
  • Adjustable UVLO and OVP cutoff with ±2% accuracy
    • Fixed 39-V maximum overvoltage clamp (TPS16632 only)
  • Adjustable output slew rate control for inrush current limiting
    • Charges large and unknown capacitive loads through thermal regulation during device power up
  • Power Good output (PGOOD)
  • Selectable overcurrent fault response options between auto-retry and latch off (MODE)
  • Analog current monitor (IMON) output (±6%)
  • UL 2367 recognized
    • File No. E169910
    • RILIM ≥ 3 kΩ
  • IEC 62368-1 certified
  • Functional Safety-Capable
  • Available in easy-to-use 24-pin VQFN package
  • 4.5-V to 60-V operating voltage, 67-V absolute maximum
  • Integrated 60-V, 31-mΩ RON hot-swap FET
  • 0.6-A to 6-A adjustable current limit (±7%)
  • Low quiescent current, 21 µA in shutdown
  • Adjustable output power limiting (TPS16632 only) (±6%)
  • Adjustable UVLO and OVP cutoff with ±2% accuracy
    • Fixed 39-V maximum overvoltage clamp (TPS16632 only)
  • Adjustable output slew rate control for inrush current limiting
    • Charges large and unknown capacitive loads through thermal regulation during device power up
  • Power Good output (PGOOD)
  • Selectable overcurrent fault response options between auto-retry and latch off (MODE)
  • Analog current monitor (IMON) output (±6%)
  • UL 2367 recognized
    • File No. E169910
    • RILIM ≥ 3 kΩ
  • IEC 62368-1 certified
  • Functional Safety-Capable
  • Available in easy-to-use 24-pin VQFN package

Description

The TPS1663x is an easy-to-use, positive 60-V, 6-A eFuse with a 31-mΩ integrated FET. Protection for the load, source, and eFuse itself are provided along with adjustable features such as accurate overcurrent protection, fast short circuit protection, output slew rate control, overvoltage protection and undervoltage lockout. The TPS16332 device integrates adjustable output power limiting (PLIM) functionality that simplifies and enables compliance to standards such as IEC61010-1 and UL1310. The device also includes adjustable overcurrent functionality. PGOOD can be used for enable and disable control of the downstream DC/DC converters.

A shutdown pin provides external control for enabling and disabling the internal FET, as well as placing the device in a low current shutdown mode. For system status monitoring and downstream load control, the device provides fault and a precise current monitor output. The MODE pin allows flexibility to configure the device between the two current-limiting fault responses (latch off and auto-retry).

The devices are available in a 4-mm × 4-mm 24-pin VQFN package and are specified over a –40°C to +125°C temperature range.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request