0
TL3016
  • TL3016
  • TL3016

TL3016

ACTIVE

High speed, precision comparator with differential output

Texas Instruments TL3016 Product Info

1 April 2026 0

Parameters

Number of channels

1

Output type

Differential

Propagation delay time (µs)

0.0078

Vs (max) (V)

14

Vs (min) (V)

5

Rating

Catalog

Features

Strobe

Iq per channel (typ) (mA)

10.6

Vos (offset voltage at 25°C) (max) (mV)

3

Rail-to-rail

No

Operating temperature range (°C)

-40 to 85

Input bias current (±) (max) (nA)

10000

VICR (max) (V)

12.5

VICR (min) (V)

1.25

Package

SOIC (D)-8-29.4 mm² 4.9 x 6

Features

  • Ultrafast Operation...7.6 ns (Typ)
  • Low Positive Supply Current
    10.6 mA (Typ)
  • Operates From a Single 5-V Supply or From a Split ±5-V Supply
  • Complementary Outputs
  • Low Offset Voltage
  • No Minimum Slew Rate Requirement
  • Output Latch Capability
  • Functional Replacement to the LT1016
  • Ultrafast Operation...7.6 ns (Typ)
  • Low Positive Supply Current
    10.6 mA (Typ)
  • Operates From a Single 5-V Supply or From a Split ±5-V Supply
  • Complementary Outputs
  • Low Offset Voltage
  • No Minimum Slew Rate Requirement
  • Output Latch Capability
  • Functional Replacement to the LT1016

Description

The TL3016 is an ultrafast comparator designed to interface directly to TTL logic while operating from either a single 5-V power supply or dual ±5-V supplies. It features extremely tight offset voltage and high gain for precision applications. It has complementary outputs that can be latched using the LATCH ENABLE terminal. Figure 1 shows the positive supply current of this comparator. The TL3016 only requires 10.6 mA (typical) to achieve a propagation delay of 7.6 ns.

The TL3016 is a pin-for-pin functional replacement for the LT1016 comparator, offering higher speed operation but consuming half the power.

The TL3016 is an ultrafast comparator designed to interface directly to TTL logic while operating from either a single 5-V power supply or dual ±5-V supplies. It features extremely tight offset voltage and high gain for precision applications. It has complementary outputs that can be latched using the LATCH ENABLE terminal. Figure 1 shows the positive supply current of this comparator. The TL3016 only requires 10.6 mA (typical) to achieve a propagation delay of 7.6 ns.

The TL3016 is a pin-for-pin functional replacement for the LT1016 comparator, offering higher speed operation but consuming half the power.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request