0
LMQ61460
  • LMQ61460
  • LMQ61460
  • LMQ61460

LMQ61460

ACTIVE

Industrial 3-V to 36-V, 6-A, low-noise synchronous step-down converter

Texas Instruments LMQ61460 Product Info

1 April 2026 9

Parameters

Rating

Catalog

Topology

Buck

Iout (max) (A)

6

Vin (max) (V)

36

Vin (min) (V)

3

Vout (max) (V)

34

Vout (min) (V)

1

Features

Enable, Fixed soft start, Forced PWM, Frequency synchronization, Light-load efficiency, Overcurrent protection, Power good, Prebias startup, Spread Spectrum, Synchronous rectification, Tracking, UVLO adjustable, Wettable flanks package

Control mode

current mode

Operating temperature range (°C)

-40 to 150

Iq (typ) (A)

0.000007

Duty cycle (max) (%)

98

TI functional safety category

Functional Safety-Capable

Package

VQFN-HR (RJR)-14-14 mm² 4 x 3.5

Features

  • Functional Safety-Capable
  • ZEN 2 switcher
    • HotRod™ package minimizes switch node ringing
    • Internal bypass capacitors reduce EMI
    • Parallel input path minimizes parasitic inductance
    • Spread spectrum reduces peak emissions
    • Adjustable switch node rise time
  • Designed for rugged applications
    • Supports 42V transient
    • 0.4V dropout with 4A load (typical)
  • High efficiency power conversion at all loads
    • 7µA no load current at 13.5 VIN, 3.3 VOUT
    • 90% PFM efficiency at 1mA, 13.5 VIN, 5 VOUT
    • Low MOSFET ON resistance
      • RDS_ON_HS = 41mΩ (typical)
      • RDS_ON_LS = 21mΩ (typical)
  • External bias option for improved efficiency
  • Pin compatible with:
  • Use TPSM63606 module for faster time to market
  • Functional Safety-Capable
  • ZEN 2 switcher
    • HotRod™ package minimizes switch node ringing
    • Internal bypass capacitors reduce EMI
    • Parallel input path minimizes parasitic inductance
    • Spread spectrum reduces peak emissions
    • Adjustable switch node rise time
  • Designed for rugged applications
    • Supports 42V transient
    • 0.4V dropout with 4A load (typical)
  • High efficiency power conversion at all loads
    • 7µA no load current at 13.5 VIN, 3.3 VOUT
    • 90% PFM efficiency at 1mA, 13.5 VIN, 5 VOUT
    • Low MOSFET ON resistance
      • RDS_ON_HS = 41mΩ (typical)
      • RDS_ON_LS = 21mΩ (typical)
  • External bias option for improved efficiency
  • Pin compatible with:
  • Use TPSM63606 module for faster time to market

Description

The LMQ61460 is a high-performance, DC-DC synchronous buck converter with integrated bypass capacitors. With integrated high-side and low-side MOSFETs, up to 6A of output current is delivered over a wide input range of 3.0V to 36V; tolerant of 42V, easing input surge protection design. The device implements soft recovery from dropout eliminating overshoot on the output.

LMQ61460 with ZEN 2 switcher technology is specifically designed for minimal EMI. The device incorporates pseudo-random spread spectrum, integrated bypass capacitors, adjustable SW node rise time, low-EMI VQFN-HR package featuring low switch node ringing, and optimized pinout for ease of use. The switching frequency can be synchronized between 200kHz and 2.2MHz to avoid noise sensitive frequency bands. In addition, the frequency can be selected for improved efficiency at low operating frequency or smaller design size at high operating frequency.

Auto mode enables frequency foldback when operating at light loads, allowing an unloaded current consumption of only 7µA (typical) and high light load efficiency. Seamless transition between PWM and PFM modes, along with very low MOSFET ON resistances and an external bias input, makes sure of exceptional efficiency across the entire load range.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request