0
UCC27289
  • UCC27289
  • UCC27289
  • UCC27289

UCC27289

ACTIVE

120V 3A half-bridge gate driver with 8V UVLO and enable options

Texas Instruments UCC27289 Product Info

1 April 2026 4

Parameters

Bootstrap supply voltage (max) (V)

120

Power switch

MOSFET

Input supply voltage (min) (V)

8

Input supply voltage (max) (V)

16

Peak output current (A)

3

Operating temperature range (°C)

-40 to 125

Undervoltage lockout (typ) (V)

8

Rating

Catalog

Propagation delay time (µs)

0.016

Rise time (ns)

12

Fall time (ns)

10

Iq (mA)

0.002

Input threshold

TTL

Channel input logic

TTL

Switch node voltage (V)

-10

Features

Enable, Integrated bootstrap diode, Negative Voltage Handling on Input

TI functional safety category

Functional Safety-Capable

Driver configuration

Dual inputs

Package

SOIC (D)-8-29.4 mm² 4.9 x 6

Features

  • Drives two N-channel MOSFETs in high-side low-side configuration
  • Enable/disable functionality in DRC package

  • Low current (7-µA) consumption when disabled

  • 16-ns typical propagation delay
  • 12-ns rise, 10-ns fall time with 1800-pF load (typical)
  • 1-ns typical delay matching
  • Integrated 100V bootstrap diode
  • 8-V typical undervoltage lockout
  • Absolute maximum negative voltage handling on inputs (–5 V)
  • Absolute maximum negative voltage handling on HS (–14 V)
  • ±3-A peak output current
  • Absolute maximum boot voltage 120 V
  • Inputs are independent of each other and VDD
  • Under voltage lockout for both channels
  • Specified from –40°C to 140°C junction temperature
  • Drives two N-channel MOSFETs in high-side low-side configuration
  • Enable/disable functionality in DRC package

  • Low current (7-µA) consumption when disabled

  • 16-ns typical propagation delay
  • 12-ns rise, 10-ns fall time with 1800-pF load (typical)
  • 1-ns typical delay matching
  • Integrated 100V bootstrap diode
  • 8-V typical undervoltage lockout
  • Absolute maximum negative voltage handling on inputs (–5 V)
  • Absolute maximum negative voltage handling on HS (–14 V)
  • ±3-A peak output current
  • Absolute maximum boot voltage 120 V
  • Inputs are independent of each other and VDD
  • Under voltage lockout for both channels
  • Specified from –40°C to 140°C junction temperature

Description

The UCC27289 is a robust N-channel MOSFET driver with a maximum switch node (HS) voltage rating of 100 V. It allows for two N-channel MOSFETs to be controlled in half-bridge or synchronous buck configuration based topologies. Its 3-A peak source and sink current along with low pull-up and pull-down resistance allows the UCC27289 to drive large power MOSFETs with minimum switching losses during the transition of the MOSFET Miller plateau. Since the inputs are independent of the supply voltage, UCC27289 can be used in conjunction with both analog and digital controllers. Two inputs are completely independent of each other and thus two outputs can be overlapped by overlapping inputs, if needed. The enable and disable functionality provides additional system flexibility by reducing power consumption by the driver and responds to fault events within the system.

The input pins as well as the HS pin are able to tolerate significant negative voltage, which improves system robustness. Small propagation delay and delay matching specifications minimize the dead-time requirement which improves system efficiency.

Under voltage lockout (UVLO) is provided for both the high-side and low-side driver stages forcing the outputs low if the VDD voltage is below the specified threshold. An integrated bootstrap diode eliminates the need for an external discrete diode in many applications, which saves board space and reduces system cost. UCC27289 is offered in multiple packages to accommodate system requirements such as robustness in harsh environments and density in compact applications.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request