0
THS4524-EP
  • THS4524-EP

THS4524-EP

ACTIVE

Enhanced Product very low power quad channel rail-to-rail output fully differential amplifier Supports Defense, Aerospace, and Medical Applications Supports Defense, Aerospace, and Medical Applications

Texas Instruments THS4524-EP Product Info

1 April 2026 4

Parameters

Number of channels

4

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.5

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.5

BW at Acl (MHz)

145

Acl, min spec gain (V/V)

1

Slew rate (typ) (V/µs)

490

Architecture

Bipolar, Fully Differential ADC Driver

Vn at flatband (typ) (nV√Hz)

4.6

Iq per channel (typ) (mA)

1

Rail-to-rail

In to V-, Out

Vos (offset voltage at 25°C) (max) (mV)

8

Operating temperature range (°C)

-55 to 125

Iout (typ) (mA)

55

2nd harmonic (dBc)

122

3rd harmonic (dBc)

141

Frequency of harmonic distortion measurement (MHz)

0.001

GBW (typ) (MHz)

95

Input bias current (max) (pA)

900000

Features

Shutdown

CMRR (typ) (dB)

102

Rating

HiRel Enhanced Product

Package

TSSOP (DBT)-38-62.08 mm² 9.7 x 6.4

Features

  • Fully Differential Architecture
  • Bandwidth: 145 MHz
  • Slew Rate: 490 V/µs
  • HD2: –133 dBc at 10 kHz
    (1 VRMS, RL = 1 kΩ)
  • HD3: –140 dBc at 10 kHz
    (1 VRMS, RL = 1 kΩ)
  • Input Voltage Noise: 4.6 nV/√Hz
    (f = 100 kHz)
  • THD+N: –112dBc (0.00025%) at 1 kHz
    (22-kHz BW, G = 1, 5 VPP)
  • Open-Loop Gain: 119 dB
  • NRI—Negative Rail Input
  • RRO—Rail-to-Rail Output
  • Output Common-Mode Control
    (With Low Offset and Drift)
  • Power Supply:
    • Voltage: +2.5 V (±1.25 V)
      to +5.5 V (±2.75 V)
    • Current: 1.14 mA/ch
  • Power-Down Capability: 20 µA (Typical)

Supports Defense, Aerospace, and Medical Applications

  • Controlled Baseline
  • One Assembly/Test Site
  • One Fabrication Site
  • Available in Military (–55°C/125°C) Temperature Range(1)
  • Extended Product Life Cycle
  • Extended Product-Change Notification
  • Product Traceability

(1) Additional temperature ranges available - contact factory
All trademarks are the property of their respective owners.

  • Fully Differential Architecture
  • Bandwidth: 145 MHz
  • Slew Rate: 490 V/µs
  • HD2: –133 dBc at 10 kHz
    (1 VRMS, RL = 1 kΩ)
  • HD3: –140 dBc at 10 kHz
    (1 VRMS, RL = 1 kΩ)
  • Input Voltage Noise: 4.6 nV/√Hz
    (f = 100 kHz)
  • THD+N: –112dBc (0.00025%) at 1 kHz
    (22-kHz BW, G = 1, 5 VPP)
  • Open-Loop Gain: 119 dB
  • NRI—Negative Rail Input
  • RRO—Rail-to-Rail Output
  • Output Common-Mode Control
    (With Low Offset and Drift)
  • Power Supply:
    • Voltage: +2.5 V (±1.25 V)
      to +5.5 V (±2.75 V)
    • Current: 1.14 mA/ch
  • Power-Down Capability: 20 µA (Typical)

Supports Defense, Aerospace, and Medical Applications

  • Controlled Baseline
  • One Assembly/Test Site
  • One Fabrication Site
  • Available in Military (–55°C/125°C) Temperature Range(1)
  • Extended Product Life Cycle
  • Extended Product-Change Notification
  • Product Traceability

(1) Additional temperature ranges available - contact factory
All trademarks are the property of their respective owners.

Description

The THS4524 is a very low-power, fully differential operational amplifier with rail-to-rail output and an input common-mode range that includes the negative rail. This amplifier is designed for low-power data acquisition systems and high-density applications where power dissipation is a critical parameter, and provide exceptional performance in audio applications.

This fully differential op amp features accurate output common-mode control that allows for dc-coupling when driving analog-to-digital converters (ADCs). This control, coupled with an input common-mode range below the negative rail as well as rail-to-rail output, allows for easy interfacing between single-ended, ground-referenced signal sources. Additionally, the THS4524 is ideally suited for driving both successive-approximation register (SAR) and delta-sigma (ΔΣ) ADCs using only a single +2.5-V to +5-V and ground power supply.

The THS4524 fully differential op amp is characterized for operation over the full industrial temperature range from –55°C to 125°C.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request