0
TAS2320
  • TAS2320
  • TAS2320

TAS2320

ACTIVE

15W, mono digital input Class-D speaker amplifier with 14V external boost support

Texas Instruments TAS2320 Product Info

1 April 2026 3

Parameters

Audio input type

Digital Input

Architecture

Class-D

Speaker channels (max)

Mono

Control interface

Hardware, I2C

Output power (W)

15

Power stage supply (max) (V)

14

Power stage supply (min) (V)

2.5

THD + N at 1 kHz (%)

0.004

Load (min) (Ω)

3.2

Analog supply voltage (min) (V)

2.5

Analog supply voltage (max) (V)

14

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Package

VQFN-HR (RBG)-26-14 mm² 3.5 x 4

Features

  • Powerful Class-D amplifier
    • 19W output power @1% THD+N
    • 15V external PVDD supply
  • Best-in-class efficiency
    • Up to 93.2% efficiency @ 1% TDH+N power
    • 14.7mW idle channel power, noise gate off
    • 5.3mW idle channel power, noise gate on
    • Integrated 1.8V VDD Y-bridge
  • High performance audio channel
    • 14.2µV A-wt. idle channel noise
    • 114.4dB Dynamic Range
    • -90dB THD+N
    • Low EMI performance with ERC and SSM
    • < 1µs chip to chip group delay matching
  • Advanced integrated features
    • Signal detection high efficiency modes
    • High accuracy supply voltage monitor & temp sensor
    • Boost sharing secondary device support
    • External Class-H Boost control algorithm
  • Ease of use features
    • HW pin control or I2C based control
    • Clock based power up/down
    • Auto clock rate detection: 16 to 192kHz
    • MCLK free operation
    • Thermal and over current protection
  • Power Supplies and user interface
    • VBAT: 2.5V to 5.5V
    • VDD: 1.65V to 1.95V
    • IOVDD: 1.8V or 3.3V
    • PVDD: 2.5V to 15V
    • I2S/TDM: 8 channels
  • 26-Pin, 0.4mm Pitch, QFN package
  • Powerful Class-D amplifier
    • 19W output power @1% THD+N
    • 15V external PVDD supply
  • Best-in-class efficiency
    • Up to 93.2% efficiency @ 1% TDH+N power
    • 14.7mW idle channel power, noise gate off
    • 5.3mW idle channel power, noise gate on
    • Integrated 1.8V VDD Y-bridge
  • High performance audio channel
    • 14.2µV A-wt. idle channel noise
    • 114.4dB Dynamic Range
    • -90dB THD+N
    • Low EMI performance with ERC and SSM
    • < 1µs chip to chip group delay matching
  • Advanced integrated features
    • Signal detection high efficiency modes
    • High accuracy supply voltage monitor & temp sensor
    • Boost sharing secondary device support
    • External Class-H Boost control algorithm
  • Ease of use features
    • HW pin control or I2C based control
    • Clock based power up/down
    • Auto clock rate detection: 16 to 192kHz
    • MCLK free operation
    • Thermal and over current protection
  • Power Supplies and user interface
    • VBAT: 2.5V to 5.5V
    • VDD: 1.65V to 1.95V
    • IOVDD: 1.8V or 3.3V
    • PVDD: 2.5V to 15V
    • I2S/TDM: 8 channels
  • 26-Pin, 0.4mm Pitch, QFN package

Description

The TAS2320 is a mono, digital input Class-D audio amplifier designed for efficiently driving high peak power into loudspeakers.

TAS2320 is optimized to deliver best battery life for real-use cases of music playback and voice calls. Advanced efficiency optimization features like Y-bridge, and other algorithms enable the device to produce best-in-class efficiency across all power regions of operation. The Class-D amplifier is capable of delivering 15W output powerusing external PVDD supply.

Up to four devices can share a common bus via I2S/TDM and I2C interfaces. TAS2320 also supports HW pin based pre-defined controls that can configure the device for desired mode of operation without requiring any I2C controls.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request