0
TAC5112-Q1
  • TAC5112-Q1
  • TAC5112-Q1
  • TAC5112-Q1

TAC5112-Q1

ACTIVE

Automotive low-power stereo audio codec with 105dB dynamic range ADC, 114dB dynamic range DAC

Texas Instruments TAC5112-Q1 Product Info

1 April 2026 3

Parameters

Number of ADC channels

2

Number of DAC channels

2

Digital audio interface

I2S, LJ, TDM

Control interface

I2C, SPI

Analog inputs

2

Analog outputs

2, 4

Features

Digital mic support, Headset detect, Low latency, Low power, Mic bias, Phase-locked loop (PLL), PowerTune, Single supply, Stereo headphone amplifier, Thermal Foldback

Sampling rate (max) (kHz)

768

Rating

Automotive

ADC SNR (typ) (dB)

105

DAC SNR (typ) (dB)

114

Operating temperature range (°C)

-40 to 125

Package

WQFN (RTV)-32-25 mm² 5 x 5

Features

  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C ≤ TA ≤ +125°C
  • Stereo low-power audio ADC
    • Performance:
      • Line/Microphone differential input dynamic range: 105dB
      • THD+N: –97dB
      • Channel summing mode supports high SNR: 108dB
    • Input voltage:
      • Differential, 2VRMS full-scale input
      • Single-ended, 1VRMS full-scale input
    • Input mix/mux options
    • ADC sample rate (fS) = 4kHz to 768kHz
    • Programmable microphone bias (up to 3V)
    • Up to 4 Record Channels
      • 2 Channel Analog + 2 Channel Digital
      • 1 Channel Analog + 3 Channel Digital
      • 4 Channel Digital
  • Stereo differential or Quad single-ended high performance audio DAC
    • Performance:
      • DAC to differential line-out dynamic range: 114dB
      • DAC to differential headphone-out dynamic range: 114dB
      • THD+N:–96dB
    • Line-out/headphone output voltage :
      • Differential, 2VRMS full-scale
      • Pseudo-differential, 1VRMS full-scale
      • Single-ended, 1VRMS full-scale
    • DAC sample rate (fS) = 4kHz to 768kHz
  • Common features
    • Analog input to output bypass
    • Voice activity detection
    • Ultrasonic activity detection
    • Battery and thermal foldback protection
    • Signal distortion limiter
    • Low and Ultra-low latency filter options
    • Programmable HPF and Biquad filters
    • I2C or SPI control interface
    • Audio serial interface
      • Format: TDM, I2S or Left-justified (LJ)
      • Word length: 16, 20, 24 or 32 bits
      • Bus controller and target modes
    • Programmable PLL for flexible clocking
    • Auto clock and sample rate detection
    • Low power modes
      • 8mW for 2-Ch recording (1.8V Supply)
      • 10.5mW for 2-Ch playback (1.8V Supply)
    • Single supply operation AVDD: 1.8V or 3.3V
    • I/O supply operation: 1.2V or 1.8V or 3.3V
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C ≤ TA ≤ +125°C
  • Stereo low-power audio ADC
    • Performance:
      • Line/Microphone differential input dynamic range: 105dB
      • THD+N: –97dB
      • Channel summing mode supports high SNR: 108dB
    • Input voltage:
      • Differential, 2VRMS full-scale input
      • Single-ended, 1VRMS full-scale input
    • Input mix/mux options
    • ADC sample rate (fS) = 4kHz to 768kHz
    • Programmable microphone bias (up to 3V)
    • Up to 4 Record Channels
      • 2 Channel Analog + 2 Channel Digital
      • 1 Channel Analog + 3 Channel Digital
      • 4 Channel Digital
  • Stereo differential or Quad single-ended high performance audio DAC
    • Performance:
      • DAC to differential line-out dynamic range: 114dB
      • DAC to differential headphone-out dynamic range: 114dB
      • THD+N:–96dB
    • Line-out/headphone output voltage :
      • Differential, 2VRMS full-scale
      • Pseudo-differential, 1VRMS full-scale
      • Single-ended, 1VRMS full-scale
    • DAC sample rate (fS) = 4kHz to 768kHz
  • Common features
    • Analog input to output bypass
    • Voice activity detection
    • Ultrasonic activity detection
    • Battery and thermal foldback protection
    • Signal distortion limiter
    • Low and Ultra-low latency filter options
    • Programmable HPF and Biquad filters
    • I2C or SPI control interface
    • Audio serial interface
      • Format: TDM, I2S or Left-justified (LJ)
      • Word length: 16, 20, 24 or 32 bits
      • Bus controller and target modes
    • Programmable PLL for flexible clocking
    • Auto clock and sample rate detection
    • Low power modes
      • 8mW for 2-Ch recording (1.8V Supply)
      • 10.5mW for 2-Ch playback (1.8V Supply)
    • Single supply operation AVDD: 1.8V or 3.3V
    • I/O supply operation: 1.2V or 1.8V or 3.3V

Description

The TAC5112-Q1 is an automotive, low-power stereo audio codec with 2VRMS differential input, 105dB stereo ADC and 2VRMS differential output, 114dB stereo or 1VRMS single-ended output, 107dB quad DAC. The TAC5112-Q1 supports both differential and single-ended inputs and outputs. The ADC supports both line/microphone input signals with options for AC or DC coupling configurations. The DAC outputs can be configured for either line-output or headphone loads. The DAC can drive up to 62.5mW into a 16Ω headphone load. The TAC5112-Q1 integrates programable channel gain, digital volume control, a low-jitter phase-locked loop (PLL), a programmable high-pass filter (HPF), programmable EQ and biquad filters, low-latency and ultra-low latency filter modes, and allows for sample rates up to 768kHz for both ADC and DAC signal chains. The TAC5112-Q1 supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with I2C or SPI. These integrated high-performance features, along with a single supply operation, makes TAC5112-Q1 an excellent choice for space-constrained automotive systems.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request