0
SN74TVC16222A
  • SN74TVC16222A
  • SN74TVC16222A
  • SN74TVC16222A

SN74TVC16222A

ACTIVE

5-V, 22-channel voltage clamp

Texas Instruments SN74TVC16222A Product Info

1 April 2026 3

Parameters

Configuration

1:1 SPST

Number of channels

23

Power supply voltage - single (V)

0.8, 1.2, 1.8, 2.5, 3.3, 5

Protocols

Analog

Ron (typ) (Ω)

10

CON (typ) (pF)

12

Bandwidth (MHz)

100

Operating temperature range (°C)

-40 to 85

Input/output continuous current (max) (A)

0.064

Rating

Catalog

Drain supply voltage (max) (V)

5.5

Supply voltage (max) (V)

5.5

Package

SSOP (DL)-48-164.358 mm² 15.88 x 10.35

Features

  • Member of the Texas Instruments Widebus™ Family
  • Designed to Be Used in Voltage-Limiting Applications
  • 6.5- On-State Connection Between Ports A and B
  • Flow-Through Pinout for Ease of Printed Circuit Board Trace Routing
  • Direct Interface With GTL+ Levels
  • ESD Protection Exceeds JESD 22
    • 2000-V Human-Body Model (A114-A)
    • 200-V Machine Model (A115-A)
    • 1000-V Charged-Device Model (C101)

Widebus and TI are trademarks of Texas Instruments.

  • Member of the Texas Instruments Widebus™ Family
  • Designed to Be Used in Voltage-Limiting Applications
  • 6.5- On-State Connection Between Ports A and B
  • Flow-Through Pinout for Ease of Printed Circuit Board Trace Routing
  • Direct Interface With GTL+ Levels
  • ESD Protection Exceeds JESD 22
    • 2000-V Human-Body Model (A114-A)
    • 200-V Machine Model (A115-A)
    • 1000-V Charged-Device Model (C101)

Widebus and TI are trademarks of Texas Instruments.

Description

The SN74TVC16222A provides 23 parallel NMOS pass transistors with a common gate. The low on-state resistance of the switch allows connections to be made with minimal propagation delay.

The device can be used as a 22-bit switch, with the gates cascaded together to a reference transistor. The low-voltage side of each pass transistor is limited to a voltage set by the reference transistor. This is done to protect components with inputs that are sensitive to high-state voltage-level overshoots. (See Application Information in this data sheet.)

All of the transistors in the TVC array have the same electrical characteristics; therefore, any one of them can be used as the reference transistor. Because, within the device, the characteristics from transistor to transistor are equal, the maximum output high-state voltage (VOH) is approximately the reference voltage (VREF), with minimal deviation from one output to another. This is a benefit of the TVC solution over discrete devices. Because the fabrication of the transistors is symmetrical, either port connection of each bit can be used as the low-voltage side, and the I/O signals are bidirectional through each FET.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request