0
OPA598
  • OPA598
  • OPA598

OPA598

ACTIVE

85V, 100µV wide-bandwidth (10MHz) high-output-current (250mA) precision operational amplifier

Texas Instruments OPA598 Product Info

1 April 2026 9

Parameters

Number of channels

1

Iout (typ) (A)

0.25

GBW (typ) (MHz)

10

Slew rate (typ) (V/µs)

45

Vos (offset voltage at 25°C) (max) (mV)

2

Offset drift (typ) (V/°C)

0.0000001

Iq per channel (typ) (mA)

3.25

Features

Adj Current Limit, MUX Friendly, Shutdown

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Input bias current (max) (pA)

10

CMRR (typ) (dB)

140

Rail-to-rail

Out

Architecture

CMOS

Package

WSON (DNT)-12-16 mm² 4 x 4

Features

  • Wide power-supply range: 8V to 85V
  • High output current: 350mA
  • Low noise: 6nV/√Hz at 10kHz
  • Wide bandwidth: 10MHz GBW
  • High slew rate: 40V/µs
  • Low offset voltage: ±50µV
  • Low offset voltage drift: ±1µV/°C
  • Rail-to-rail output
  • Disable function
  • Quiescent current: Enabled: 3.25mADisabled: 250µA
  • Overtemperature and overcurrent flags
  • Temperature range: –40°C to +125°C
  • For higher dc precision see the OPA593
  • Wide power-supply range: 8V to 85V
  • High output current: 350mA
  • Low noise: 6nV/√Hz at 10kHz
  • Wide bandwidth: 10MHz GBW
  • High slew rate: 40V/µs
  • Low offset voltage: ±50µV
  • Low offset voltage drift: ±1µV/°C
  • Rail-to-rail output
  • Disable function
  • Quiescent current: Enabled: 3.25mADisabled: 250µA
  • Overtemperature and overcurrent flags
  • Temperature range: –40°C to +125°C
  • For higher dc precision see the OPA593

Description

The OPA598 is a high-voltage (85V), high-output-current (350mA), unity-gain-stable operational amplifier with a high bandwidth (10MHz).

The OPA598 power amplifier combines low offset voltage (50µV) and offset voltage drift (1µV/°C) with additional features, including a programmable current limit and overcurrent flags. The OPA598 features mux-friendly inputs that enable differential input voltage range to the supply rails and help improve settling performance in multichannel systems.

The programmable current limit can be set with an external resistor or voltage source to limit the output current and protect downstream devices. In case of an overcurrent or overtemperature condition, the device indicates erroneous operation through a status flag. An included disable feature is used to shut down the device, saving power and placing the output into a high-impedance state.

The device is unity-gain stable, enabling operation as a high-impedance buffer, while the wide bandwidth and high slew enable high signal gains. The high output current and capacitive drive allow the device to drive external field-effect transistors (FETs) used to provide higher system currents, such as in a digital power supply.

If higher dc precision is required then the OPA593 can be used as a direct replacement.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request