0
ACTIVE
Architecture |
FET / CMOS Input, Voltage FB |
Number of channels |
1 |
Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) |
2.5 |
Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) |
5.5 |
GBW (typ) (MHz) |
200 |
BW at Acl (MHz) |
450 |
Acl, min spec gain (V/V) |
1 |
Slew rate (typ) (V/µs) |
300 |
Vn at flatband (typ) (nV√Hz) |
5.8 |
Vn at 1 kHz (typ) (nV√Hz) |
80 |
Iq per channel (typ) (mA) |
8.3 |
Vos (offset voltage at 25°C) (max) (mV) |
9 |
Rail-to-rail |
In to V-, Out |
Rating |
Automotive |
Operating temperature range (°C) |
-55 to 150 |
CMRR (typ) (dB) |
80 |
Input bias current (max) (pA) |
50 |
Offset drift (typ) (µV/°C) |
7 |
Iout (typ) (mA) |
100 |
2nd harmonic (dBc) |
81 |
3rd harmonic (dBc) |
93 |
Frequency of harmonic distortion measurement (MHz) |
1 |
SOT-23 (DBV)-5-8.12 mm² 2.9 x 2.8
The OPA356-Q1 is a high-speed voltage-feedback CMOS operational amplifier designed for video and other applications requiring wide bandwidth. The OPA356-Q1 is unity-gain stable and can drive large output currents. Differential gain is 0.02% and differential phase is 0.05°. Quiescent current is only 8.3 mA.
The OPA356-Q1 is optimized for operation on single or dual supplies as low as 2.5 V (±1.25 V) and up to 5.5 V (±2.75 V). The common-mode input range for the OPA356-Q1 extends 100 mV below ground and up to 1.5 V from V+. The output swing is within 100 mV of the rails, supporting wide dynamic range.
The OPA356-Q1 is available in the SOT23-5 package and is specified over the –40°C to 125°C range.
WELL LINK CHIPS GROUP CO.,LIMITED FLAT/RM 1802 BEVERLY HOUSE 93-107 LOCKHART ROAD WANCHAI HK
