0
MSP430FG4616
  • MSP430FG4616
  • MSP430FG4616
  • MSP430FG4616

MSP430FG4616

ACTIVE

8 MHz MCU with 92KB Flash, 4KB SRAM, 12-bit ADC, Dual DAC, DMA, 3 OpAmp, 160 seg LCD

Texas Instruments MSP430FG4616 Product Info

1 April 2026 6

Parameters

CPU

MSP430

Frequency (MHz)

8

Flash memory (kByte)

92

RAM (kByte)

4

ADC type

12-bit SAR

Features

Advanced sensing, LCD, OpAmp, Real-time clock

UART

1

Number of ADC channels

12

SPI

1

USB

No

Operating temperature range (°C)

-40 to 85

Rating

Catalog

Communication interface

I2C, SPI, UART

Operating system

BareMetal (No OS), TI RTOS

Hardware accelerators

0

Nonvolatile memory (kByte)

92

Number of GPIOs

80

Number of I2Cs

1

Security

Secure debug

Package

JRBGA (ZQW)-113-49 mm² 7 x 7

Features

  • Low supply-voltage range: 1.8 V to 3.6 V
  • Ultra-low power consumption
    • Active mode: 400 µA at 1 MHz, 2.2 V
    • Standby mode: 1.3 µA
    • Off mode (RAM retention): 0.22 µA
  • Five power-saving modes
  • Wakeup from standby mode in less than 6 µs
  • 16-bit RISC architecture, extended memory, 125‑ns instruction cycle time
  • Three-channel internal DMA
  • 12-bit analog-to-digital converter (ADC) with internal reference, sample-and-hold and autoscan feature
  • Three configurable operational amplifiers
  • Dual 12-bit digital-to-analog converters (DACs) with synchronization
  • 16-bit Timer_A with three capture/compare registers
  • 16-bit Timer_B with seven capture/compare-with-shadow registers
  • On-chip comparator
  • Supply voltage supervisor and monitor with programmable level detection
  • Serial communication interface (USART1), select asynchronous UART or synchronous SPI by software
  • Universal serial communication interface
    • Enhanced UART supports automatic baud-rate detection
    • IrDA encoder and decoder
    • Synchronous SPI
    • I2C
  • Serial onboard programming, programmable code protection by security fuse
  • Brownout detector
  • Basic timer with real-time clock (RTC) feature
  • Integrated LCD driver up to 160 segments with regulated charge pump
  • Device Comparison summarizes the available family members
    • MSP430FG4616, MSP430FG4616,
      92KB+256B of flash or ROM,
      4KB of RAM
    • MSP430FG4617, MSP430CG4617,
      92KB+256B of flash or ROM,
      8KB of RAM
    • MSP430FG4618, MSP430CG4618,
      116KB+256B of flash or ROM,
      8KB of RAM
    • MSP430FG4619, MSP430CG4619,
      120KB+256B of flash or ROM,
      4KB of RAM
  • Low supply-voltage range: 1.8 V to 3.6 V
  • Ultra-low power consumption
    • Active mode: 400 µA at 1 MHz, 2.2 V
    • Standby mode: 1.3 µA
    • Off mode (RAM retention): 0.22 µA
  • Five power-saving modes
  • Wakeup from standby mode in less than 6 µs
  • 16-bit RISC architecture, extended memory, 125‑ns instruction cycle time
  • Three-channel internal DMA
  • 12-bit analog-to-digital converter (ADC) with internal reference, sample-and-hold and autoscan feature
  • Three configurable operational amplifiers
  • Dual 12-bit digital-to-analog converters (DACs) with synchronization
  • 16-bit Timer_A with three capture/compare registers
  • 16-bit Timer_B with seven capture/compare-with-shadow registers
  • On-chip comparator
  • Supply voltage supervisor and monitor with programmable level detection
  • Serial communication interface (USART1), select asynchronous UART or synchronous SPI by software
  • Universal serial communication interface
    • Enhanced UART supports automatic baud-rate detection
    • IrDA encoder and decoder
    • Synchronous SPI
    • I2C
  • Serial onboard programming, programmable code protection by security fuse
  • Brownout detector
  • Basic timer with real-time clock (RTC) feature
  • Integrated LCD driver up to 160 segments with regulated charge pump
  • Device Comparison summarizes the available family members
    • MSP430FG4616, MSP430FG4616,
      92KB+256B of flash or ROM,
      4KB of RAM
    • MSP430FG4617, MSP430CG4617,
      92KB+256B of flash or ROM,
      8KB of RAM
    • MSP430FG4618, MSP430CG4618,
      116KB+256B of flash or ROM,
      8KB of RAM
    • MSP430FG4619, MSP430CG4619,
      120KB+256B of flash or ROM,
      4KB of RAM

Description

The TI MSP430™ family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the device to wake up from low-power modes to active mode in less than 6 µs.

The MSP430xG461x series are microcontroller configurations with two 16-bit timers, a high-performance 12-bit ADC, dual 12-bit DACs, three configurable operational amplifiers, one universal serial communication interface (USCI), one universal synchronous/asynchronous communication interface (USART), DMA, 80 I/O pins, and a segment liquid crystal display (LCD) driver with regulated charge pump.

For complete module descriptions, see the MSP430x4xx Family User’s Guide.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request