0
LP2996-N
  • LP2996-N
  • LP2996-N
  • LP2996-N
  • LP2996-N
  • LP2996-N
  • LP2996-N
  • LP2996-N
  • LP2996-N

LP2996-N

ACTIVE

1.5A DDR termination regulator with shutdown pin for DDR2

Texas Instruments LP2996-N Product Info

1 April 2026 4

Parameters

Product type

DDR

Vin (min) (V)

1.8

Vin (max) (V)

5.5

Vout (min) (V)

0.656

Vout (max) (V)

0.698

Features

Shutdown Pin for S3

Rating

Catalog

Operating temperature range (°C)

0 to 125

Iq (typ) (mA)

0.32

DDR memory type

DDR, DDR2

Package

HSOIC (DDA)-8-29.4 mm² 4.9 x 6

Features

  • Minimum VDDQ:
    • 1.8 V (LP2996-N)
    • 1.35 V (LP2996A)
  • Source and Sink Current
  • Low Output Voltage Offset
  • No External Resistors Required for Setting Output Voltage
  • Linear Topology
  • Suspend to Ram (STR) Functionality
  • Stable With Ceramic Capacitors With Appropriate ESR
  • Low External Component Count
  • Thermal Shutdown
  • Minimum VDDQ:
    • 1.8 V (LP2996-N)
    • 1.35 V (LP2996A)
  • Source and Sink Current
  • Low Output Voltage Offset
  • No External Resistors Required for Setting Output Voltage
  • Linear Topology
  • Suspend to Ram (STR) Functionality
  • Stable With Ceramic Capacitors With Appropriate ESR
  • Low External Component Count
  • Thermal Shutdown

Description

The LP2996-N and LP2996A linear regulators are designed to meet the JEDEC SSTL-2 specifications for termination of DDR-SDRAM. The device also supports DDR2, while LP2996A supports DDR3 and DDR3L VTT bus termination with VDDQ minimum of 1.35 V. The device contains a high-speed operational amplifier to provide excellent response to load transients. The output stage prevents shoot through while delivering 1.5-A continuous current and transient peaks up to 3 A in the application as required for DDR-SDRAM termination. The LP2996-N and LP2996A also incorporate a VSENSE pin to provide superior load regulation and a VREF output as a reference for the chipset and DIMMs.

An additional feature found on the LP2996-N and LP2996A is an active-low shutdown (SD) pin that provides Suspend To RAM (STR) functionality. When SD is pulled low the VTT output will tri-state providing a high impedance output, but VREF remains active. A power savings advantage can be obtained in this mode through lower quiescent current.

TI recommends the LP2998 and LP2998-Q1 devices for automotive applications and DDR applications that require operating at temperatures below zero.

WEBENCH® design tools can be used by application designers to generate, optimize, and simlulate applications using the LP2998 and LP2998-Q1.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request