0
LM317HV
  • LM317HV
  • LM317HV
  • LM317HV
  • LM317HV

LM317HV

ACTIVE

1.5-A, 60-V, adjustable linear voltage regulator

Texas Instruments LM317HV Product Info

1 April 2026 7

Parameters

Rating

Catalog

Vin (max) (V)

60

Vin (min) (V)

4.2

Iout (max) (A)

1.5

Output options

Adjustable Output

Vout (max) (V)

57

Vout (min) (V)

1.25

Noise (µVrms)

1710

PSRR at 100 KHz (dB)

40

Iq (typ) (mA)

0.05

Thermal resistance θJA (°C/W)

23

Load capacitance (min) (µF)

0

Regulated outputs (#)

1

Accuracy (%)

5

Dropout voltage (Vdo) (typ) (mV)

2250

Operating temperature range (°C)

0 to 125

Package

TO-220 (NDE)-3-46.5328 mm² 10.16 x 4.58

Features

  • Up to 60 V Input to Output Differential
  • 1.5-A Output Current
  • Line Regulation 0.01%/V (Typical)
  • Load Regulation 0.1% (Typical)
  • 80-dB Ripple Rejection (Typical)
  • Internal Short-Circuit Current Limiting Protection
  • Thermal Overload Protection
  • –55 to 150°C Operating Temperature Range
    (LM117HV)
  • 0 to 125°C Operating Temperature Range
    (LM317HV)
  • Up to 60 V Input to Output Differential
  • 1.5-A Output Current
  • Line Regulation 0.01%/V (Typical)
  • Load Regulation 0.1% (Typical)
  • 80-dB Ripple Rejection (Typical)
  • Internal Short-Circuit Current Limiting Protection
  • Thermal Overload Protection
  • –55 to 150°C Operating Temperature Range
    (LM117HV)
  • 0 to 125°C Operating Temperature Range
    (LM317HV)

Description

The LMx17HV is an adjustable 3-terminal positive voltage regulator capable of supplying 1.5 A or more currents over a 1.25-V to 57-V output voltage range. It requires only two external resistors to set the output voltage. The LMx17HV is packaged in standard transistor packages that are easily mounted and handled.

The LMx17HV offers overload protection like current limit, thermal overload protection and safe area protection, which make the device blowout proof. The overload protection circuitry remains fully functional even if the adjustment terminal is disconnected.

Typically, no capacitors are needed unless the device is situated more than 6 inches from the input filter capacitors, in which case an input bypass is needed. An optional output capacitor can be added to improve transient response. The adjustment terminal can be bypassed to achieve very high ripple rejection ratios which are difficult to achieve with standard 3-terminal regulators.

Since the regulator is floating and sees only the input-to-output differential voltage, supplies of several hundred volts can be regulated as long as the maximum input to output differential is not exceeded, or in other words, do not short the output to ground.

By connecting a fixed resistor between the adjustment and output, the LMx17HV can also be used as a precision current regulator. Supplies with electronic shutdown can be achieved by clamping the adjustment terminal to ground, which programs the output to 1.25 V where most loads draw little current.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request