0
OPA593
  • OPA593
  • OPA593
  • OPA593
  • OPA593

OPA593

ACTIVE

85-V, 100-µV wide-bandwidth (10 MHz) high-output-current (250 mA) precision operational amplifier

Texas Instruments OPA593 Product Info

1 April 2026 7

Parameters

Number of channels

1

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

85

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

8

Vos (offset voltage at 25°C) (max) (mV)

0.1

Offset drift (typ) (µV/°C)

0.4

Input bias current (max) (pA)

10

GBW (typ) (MHz)

10

Features

Adj Current Limit, MUX Friendly, Shutdown

Slew rate (typ) (V/µs)

45

Rail-to-rail

Out

Iq per channel (typ) (mA)

3.25

Vn at 1 kHz (typ) (nV√Hz)

10

CMRR (typ) (dB)

140

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Iout (typ) (A)

0.25

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

-0.1

Input common mode headroom (to positive supply) (typ) (V)

-3.5

Output swing headroom (to negative supply) (typ) (V)

50

Output swing headroom (to positive supply) (typ) (V)

50

THD + N at 1 kHz (typ) (%)

0.00056

Package

WSON (DNT)-12-16 mm² 4 x 4

Features

  • Wide power-supply range:
    • 8 V (±4 V) to 85 V (±42.5 V)
  • Low offset voltage: ±20 µV
  • Low offset voltage drift: ±0.4 µV/°C
  • High output current: 250 mA
  • Wide gain bandwidth: 10 MHz
  • High slew rate: 45 V/µs, rising
  • Low noise: 7 nV/√Hz at 10 kHz
  • Mux-friendly inputs
  • Rail-to-rail output
  • Quiescent current:
    • Enabled: 3.25 mA
    • Disabled: 250 µA
  • Specified current limit accuracy
  • Overtemperature and overcurrent flags
  • Temperature range: –40°C to +125°C
  • Package: 12-pin WSON
  • Wide power-supply range:
    • 8 V (±4 V) to 85 V (±42.5 V)
  • Low offset voltage: ±20 µV
  • Low offset voltage drift: ±0.4 µV/°C
  • High output current: 250 mA
  • Wide gain bandwidth: 10 MHz
  • High slew rate: 45 V/µs, rising
  • Low noise: 7 nV/√Hz at 10 kHz
  • Mux-friendly inputs
  • Rail-to-rail output
  • Quiescent current:
    • Enabled: 3.25 mA
    • Disabled: 250 µA
  • Specified current limit accuracy
  • Overtemperature and overcurrent flags
  • Temperature range: –40°C to +125°C
  • Package: 12-pin WSON

Description

The OPA593 is a high-voltage (85 V), high-precision, wide-bandwidth (10 MHz), high-output-current (250 mA), unity-gain-stable, power op amp.

The OPA593 uses a laser trimming technique to improve the offset voltage (20 µV, typical) and offset voltage drift (0.4 µV/°C, typical), and thus avoids the need for calibration. This device features mux-friendly inputs that enable differential input voltage range to the supply rails and help improve settling performance in multichannel systems.

An external resistor can be used to limit the current with specified accuracy, and thus provide more precise measurements. In case of an overcurrent or overtemperature condition, the device indicates erroneous operation through a status flag. An included disable feature is used to shutdown the device, saving power and placing the output into a high-impedance state.

The device is unity-gain stable, enabling operation as a high-impedance buffer. The wide bandwidth and high slew enable high signal gains. The high output current and capacitive drive allow the device to drive external field-effect transistors (FETs) used to provide higher system currents, such as in a digital power supply.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request