0
CC2652P7
  • CC2652P7
  • CC2652P7

CC2652P7

ACTIVE

SimpleLink™ Arm® Cortex®-M4F multiprotocol 2.4-GHz wireless MCU, 704-kB Flash, integrated power amp

Texas Instruments CC2652P7 Product Info

1 April 2026 5

Parameters

CPU core

Arm® Cortex®-M4F

Technology

Bluetooth® LE, Multi-standard, Proprietary 2.4 GHz, Thread, Zigbee

Protocols

Bluetooth® Low Energy, Thread, Zigbee 3.0

Flash memory (kByte)

704

RAM (kByte)

152

Peripherals

2 SPI, 2 comparators, 4 timers, 8-bit DAC, I2C, I2S, Sensor controller

Features

Direction finding, Direction finding/AoA, End device, FTD, MTD, OAD, Sleepy end device, Zigbee coordinator, Zigbee network processor

Number of GPIOs

26

Security

Cryptographic acceleration, Device attestation & anti-counterfeit, Secure boot, Secure debug, Secure firmware & software update

Operating system

FreeRTOS, TI RTOS

Type

Wireless MCU

Sensitivity (best) (dBm)

-104

Operating temperature range (°C)

-40 to 105

Cryptographic accelerators

RNG

Edge AI enabled

No

Package

VQFN (RGZ)-48-49 mm² 7 x 7

Features

Wireless microcontroller

  • Powerful 48-MHz Arm® Cortex®-M4F processor
  • 704KB flash program memory
  • 256KB of ROM for protocols and library functions
  • 8KB of cache SRAM
  • 144KB of ultra-low leakage SRAM with parity for high-reliability operation
  • Dynamic multiprotocol manager (DMM) driver
  • Programmable radio includes support for 2-(G)FSK, 4-(G)FSK, MSK, Bluetooth® 5.2 Low Energy, IEEE 802.15.4 PHY and MAC
  • Supports over-the-air upgrade (OTA)

Ultra-low power sensor controller

  • Autonomous MCU with 4KB of SRAM
  • Sample, store, and process sensor data
  • Fast wake-up for low-power operation
  • Software defined peripherals; capacitive touch, flow meter, LCD

Low power consumption

  • MCU consumption:
    • 3.10 mA active mode, CoreMark
    • 65 µA/MHz running CoreMark
    • 0.9 µA standby mode, RTC, 144KB RAM
    • 0.1 µA shutdown mode, wake-up on pin
  • Ultra low-power sensor controller consumption:
    • 29.2 µA in 2 MHz mode
    • 799 µA in 24 MHz mode
  • Radio Consumption:
    • 6.4 mA RX
    • 21 mA TX at +10 dBm
    • 101 mA TX at +20 dBm

Wireless protocol support

High performance radio

  • -104 dBm for Bluetooth® Low Energy 125-kbps
  • Output power up to +20 dBm with temperature compensation

Regulatory compliance

  • Suitable for systems targeting compliance with these standards:
    • ETSI EN 300 328, EN 300 440 Cat. 2 and 3
    • FCC CFR47 Part 15
    • ARIB STD-T66

MCU peripherals

  • Digital peripherals can be routed to any GPIO
  • Four 32-bit or eight 16-bit general-purpose timers
  • 12-bit ADC, 200 kSamples/s, 8 channels
  • 8-bit DAC
  • Two comparators
  • Programmable current source
  • Two UART, two SSI, I2C, I2S
  • Real-time clock (RTC)
  • Integrated temperature and battery monitor

Security enablers

  • AES 128- and 256-bit cryptographic accelerator
  • ECC and RSA public key hardware accelerator
  • SHA2 Accelerator (full suite up to SHA-512)
  • True random number generator (TRNG)

Development tools and software

Operating range

  • On-chip buck DC/DC converter
  • 1.8-V to 3.8-V single supply voltage
  • -40 to +105°C

Package

  • 7-mm × 7-mm RGZ VQFN48 (26 GPIOs)
  • RoHS-compliant package

Wireless microcontroller

  • Powerful 48-MHz Arm® Cortex®-M4F processor
  • 704KB flash program memory
  • 256KB of ROM for protocols and library functions
  • 8KB of cache SRAM
  • 144KB of ultra-low leakage SRAM with parity for high-reliability operation
  • Dynamic multiprotocol manager (DMM) driver
  • Programmable radio includes support for 2-(G)FSK, 4-(G)FSK, MSK, Bluetooth® 5.2 Low Energy, IEEE 802.15.4 PHY and MAC
  • Supports over-the-air upgrade (OTA)

Ultra-low power sensor controller

  • Autonomous MCU with 4KB of SRAM
  • Sample, store, and process sensor data
  • Fast wake-up for low-power operation
  • Software defined peripherals; capacitive touch, flow meter, LCD

Low power consumption

  • MCU consumption:
    • 3.10 mA active mode, CoreMark
    • 65 µA/MHz running CoreMark
    • 0.9 µA standby mode, RTC, 144KB RAM
    • 0.1 µA shutdown mode, wake-up on pin
  • Ultra low-power sensor controller consumption:
    • 29.2 µA in 2 MHz mode
    • 799 µA in 24 MHz mode
  • Radio Consumption:
    • 6.4 mA RX
    • 21 mA TX at +10 dBm
    • 101 mA TX at +20 dBm

Wireless protocol support

High performance radio

  • -104 dBm for Bluetooth® Low Energy 125-kbps
  • Output power up to +20 dBm with temperature compensation

Regulatory compliance

  • Suitable for systems targeting compliance with these standards:
    • ETSI EN 300 328, EN 300 440 Cat. 2 and 3
    • FCC CFR47 Part 15
    • ARIB STD-T66

MCU peripherals

  • Digital peripherals can be routed to any GPIO
  • Four 32-bit or eight 16-bit general-purpose timers
  • 12-bit ADC, 200 kSamples/s, 8 channels
  • 8-bit DAC
  • Two comparators
  • Programmable current source
  • Two UART, two SSI, I2C, I2S
  • Real-time clock (RTC)
  • Integrated temperature and battery monitor

Security enablers

  • AES 128- and 256-bit cryptographic accelerator
  • ECC and RSA public key hardware accelerator
  • SHA2 Accelerator (full suite up to SHA-512)
  • True random number generator (TRNG)

Development tools and software

Operating range

  • On-chip buck DC/DC converter
  • 1.8-V to 3.8-V single supply voltage
  • -40 to +105°C

Package

  • 7-mm × 7-mm RGZ VQFN48 (26 GPIOs)
  • RoHS-compliant package

Description

The SimpleLink™ CC2652P7 device is a multiprotocol 2.4-GHz wireless microcontroller (MCU) supporting Thread, Zigbee , Matter, Bluetooth 5.2 Low Energy, IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), TI 15.4-Stack (2.4 GHz), and concurrent multiprotocol through a Dynamic Multiprotocol Manager (DMM) driver. The CC2652P7 is based on an Arm® Cortex® M4F main processor and optimized for low-power wireless communication and advanced sensing in grid infrastructure, building automation, retail automation, personal electronics and medical applications.

The CC2652P7 has a software defined radio powered by an Arm® Cortex® M0, which allows support for multiple physical layers and RF standards. The device supports operation in the 2360 to 2500-MHz frequency band. PHY and frequency switching can be done runtime through a dynamic multiprotocol manager (DMM) driver. The CC2652P7 has an efficient built-in PA that supports +10 dBm TX at 21 mA and +20 dBM TX at 101 mA in 2.4-GHz band. CC2652P7 has a receive sensitivity of -104 dBm for 125-kbps Bluetooth® Low Energy Coded PHY.

The CC2652P7 has a low sleep current of 0.9 µA with RTC and 144KB RAM retention. In addition to the main Cortex® M4F processor, the device also has an autonomous ultra-low power Sensor Controller CPU with fast wake-up capability. As an example, the sensor controller is capable of 1-Hz ADC sampling at 1-µA system current.

The CC2652P7 has Low SER (Soft Error Rate) FIT (Failure-in-time) for long operational lifetime. Always-on SRAM parity minimizes risk for corruption due to potential radiation events. Consistent with many customers’ 10 to 15 years or longer life cycle requirements, TI has a product life cycle policy with a commitment to product longevity and continuity of supply.

The CC2652P7 device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi®, Bluetooth® Low Energy, Thread, Zigbee, Wi-SUN®, Amazon Sidewalk, mioty®, Sub-1 GHz MCUs, and host MCUs. CC2652P7 is part of a scalable portfolio with flash sizes from 32KB to 704KB with pin-to-pin compatible package options. The common SimpleLink™CC13xx and CC26xx Software Development Kit (SDK) and SysConfig system configuration tool supports migration between devices in the portfolio. A comprehensive number of software stacks, application examples and SimpleLink™ Academy training sessions are included in the SDK. For more information, visit wireless connectivity.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request