0
BQ25185
  • BQ25185
  • BQ25185

BQ25185

ACTIVE

1-cell, 1-A stand-alone linear battery charger with power path and solar input support

Texas Instruments BQ25185 Product Info

1 April 2026 7

Parameters

Rating

Catalog

Number of series cells

1

Cell chemistry

Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4

Charge current (max) (A)

1

Features

BAT temp thermistor monitoring (JEITA profile), BAT temp thermistor monitoring (hot/cold profile), IC thermal regulation, IINDPM (Input current limit), Input OVP, Power Path, Solar input/MPPT, VINDPM (Input voltage threshold to maximize adaptor power)

Vin (min) (V)

3

Vin (max) (V)

25

Absolute max Vin (max) (V)

25

Control topology

Linear

Battery charge voltage (min) (V)

3.6

Battery charge voltage (max) (V)

4.65

Control interface

Standalone (RC-Settable)

Operating temperature range (°C)

-40 to 125

Package

WSON (DLH)-10-4.4 mm² 2.2 x 2

Features

  • 1A linear battery charger
    • 3.0V to 18V input voltage operating range
    • 25V tolerant input voltage
    • External resistor programmable operation
      • ILIM/VSET pin sets battery regulation voltage to 3.6V, 3.65V, 4.02V, 4.1V, 4.2V, 4.35V, or 4.4V
      • ILIM/VSET pin sets input current limit to 100mA, 500mA, or 1100mA
      • ISET pin sets charge current from 5mA to 1A
    • Supports Li-ion, Li-poly, and LiFePO4 chemistries
    • 115mΩ battery FET on-resistance
    • Supports up to 3.125A discharge current for high system loads
  • Power path management for powering the system and charging the battery
    • Regulated system voltage (SYS) at 4.5V
    • Configurable input current limit
    • Supports USB suspend mode
    • Battery tracking input voltage dynamic power management (VINDPM) for high-impedance input sources
    • Dynamic power path management optimizes charging from weak adapters
  • Ultra-low quiescent current
    • 4µA in battery-only mode
    • 30µA input adapter IQ in sleep mode
    • 3.2µA battery discharge current in factory mode
  • Integrated fault protection
    • Input overvoltage protection (VIN_OVP)
    • Battery undervoltage protection (BUVLO)
    • Battery short protection (BATSC)
    • Battery overcurrent protection (BATOCP)
    • Input current limit protection (ILIM)
    • Thermal regulation (TREG) and thermal shutdown (TSHUT)
    • Battery thermal fault protection (TS)
    • Safety timer fault
    • System short protection

    • System overvoltage protection

    • Short and open protection on the ISET and ILIM/VSET pins
  • 1A linear battery charger
    • 3.0V to 18V input voltage operating range
    • 25V tolerant input voltage
    • External resistor programmable operation
      • ILIM/VSET pin sets battery regulation voltage to 3.6V, 3.65V, 4.02V, 4.1V, 4.2V, 4.35V, or 4.4V
      • ILIM/VSET pin sets input current limit to 100mA, 500mA, or 1100mA
      • ISET pin sets charge current from 5mA to 1A
    • Supports Li-ion, Li-poly, and LiFePO4 chemistries
    • 115mΩ battery FET on-resistance
    • Supports up to 3.125A discharge current for high system loads
  • Power path management for powering the system and charging the battery
    • Regulated system voltage (SYS) at 4.5V
    • Configurable input current limit
    • Supports USB suspend mode
    • Battery tracking input voltage dynamic power management (VINDPM) for high-impedance input sources
    • Dynamic power path management optimizes charging from weak adapters
  • Ultra-low quiescent current
    • 4µA in battery-only mode
    • 30µA input adapter IQ in sleep mode
    • 3.2µA battery discharge current in factory mode
  • Integrated fault protection
    • Input overvoltage protection (VIN_OVP)
    • Battery undervoltage protection (BUVLO)
    • Battery short protection (BATSC)
    • Battery overcurrent protection (BATOCP)
    • Input current limit protection (ILIM)
    • Thermal regulation (TREG) and thermal shutdown (TSHUT)
    • Battery thermal fault protection (TS)
    • Safety timer fault
    • System short protection

    • System overvoltage protection

    • Short and open protection on the ISET and ILIM/VSET pins

Description

The BQ25185 is a linear battery charger IC optimized for small solution size and low quiescent current to extend battery life. The device is available in a small leadless package with a thermal pad for heat dissipation. The device supports up to 1A charging and system loads up to 3.125A.

The battery is charged using a standard Li-ion or LiFePO4 charging profile with three phases: precharge, constant current, and constant voltage. Thermal regulation provides the maximum charge current while managing the device temperature. The charger is optimized for battery-to-battery charging with 3V minimum input voltage operation and can withstand 25V absolute maximum line transients. The device integrates a single pushbutton input to reduce the total solution footprint.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request