0
ADS131A04
  • ADS131A04
  • ADS131A04

ADS131A04

ACTIVE

24-bit 128-kSPS 4-channel simultaneous-sampling delta-sigma ADC

Texas Instruments ADS131A04 Product Info

1 April 2026 21

Parameters

Resolution (Bits)

24

Sample rate (max) (ksps)

128

Number of input channels

4

Interface type

SPI

Architecture

Delta-Sigma

Input type

Differential, Single-ended

Multichannel configuration

Simultaneous Sampling

Rating

Catalog

Reference mode

External, Internal

Input voltage range (max) (V)

4.5

Input voltage range (min) (V)

-1.5

Features

Daisy-Chainable

Operating temperature range (°C)

-40 to 125

Power consumption (typ) (mW)

7.2

Analog supply voltage (min) (V)

3

Analog supply voltage (max) (V)

5.5

SNR (dB)

115.2

Digital supply (min) (V)

1.65

Digital supply (max) (V)

3.6

Package

TQFP (PBS)-32-49 mm² 7 x 7

Features

  • 2 or 4 simultaneous-sampling differential inputs
  • Data rates up to 128 kSPS
  • High performance:
    • Single-channel accuracy: better than 0.1% at 10,000:1 dynamic range
    • Effective resolution: 20.6 bits at 8 kSPS
    • THD: –100 dB at 50 Hz and 60 Hz
  • Integrated negative charge pump allows absolute input voltages below ground
  • Flexible analog power-supply operation:
    • Using negative charge pump: 3.0 V to 3.45 V
    • Unipolar supply: 3.3 V to 5.5 V
    • Bipolar supply: ±2.5 V
  • Digital supply: 1.65 V to 3.6 V
  • Low-drift internal voltage reference: 6 ppm/°C
  • ADC self checks
  • Cyclic redundancy check (CRC) and hamming code error correction on communications
  • Multiple SPI data interface modes:
    • Asynchronous interrupt
    • Synchronous master and slave
  • Package: 32-pin TQFP
  • Operating temperature range:
    –40°C to +125°C
  • 2 or 4 simultaneous-sampling differential inputs
  • Data rates up to 128 kSPS
  • High performance:
    • Single-channel accuracy: better than 0.1% at 10,000:1 dynamic range
    • Effective resolution: 20.6 bits at 8 kSPS
    • THD: –100 dB at 50 Hz and 60 Hz
  • Integrated negative charge pump allows absolute input voltages below ground
  • Flexible analog power-supply operation:
    • Using negative charge pump: 3.0 V to 3.45 V
    • Unipolar supply: 3.3 V to 5.5 V
    • Bipolar supply: ±2.5 V
  • Digital supply: 1.65 V to 3.6 V
  • Low-drift internal voltage reference: 6 ppm/°C
  • ADC self checks
  • Cyclic redundancy check (CRC) and hamming code error correction on communications
  • Multiple SPI data interface modes:
    • Asynchronous interrupt
    • Synchronous master and slave
  • Package: 32-pin TQFP
  • Operating temperature range:
    –40°C to +125°C

Description

The ADS131A02 and ADS131A04 devices are two- and four-channel, simultaneous-sampling, 24-bit, delta-sigma (ΔΣ), analog-to-digital converters (ADCs). The wide dynamic range, with scalable data rates up to 128 kSPS, and internal fault monitors make the ADS131A02 or ADS131A04 a good choice when designing for energy monitoring, grid protection, and control applications. The ADC inputs can be independently and directly interfaced to a resistor-divider network, a current transformer, or a Rogowski coil to measure voltage or current. Flexible power-supply options, including an internal negative charge pump, are available to maximize the effective resolution for high dynamic range applications.

Asynchronous and synchronous master and slave interface options are available, providing ADC configuration flexibility when chaining multiple devices in a single system. Several interface checks, ADC startup checks, and data integrity checks can be enabled on the interface to report errors in the ADC and during data transfer.

The complete analog front-end (AFE) solutions are packaged in a 32-pin TQFP package and are specified over the industrial temperature range of –40°C to +125°C.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request