0
TC1070
  • TC1070

TC1070

In Production

The TC1070, TC1071, and TC1187 are adjustable LDOs designed to supersede a variety of older (bipolar) voltage regulators. Total supply current is typically 50µA at full load, (20 to 60 times lower than in bipolar regulators). The devices’ key features include ultra low noise operation, very low dropout voltage — typically 85mV (TC1070); 180mV (TC1071); and 270mV (TC1187) at full load, and fast response to step changes in load. Supply current is reduced to 0.5 µA (max) when the shutdown input is low. The devices incorporate both over-temperature and over-current protection. Output voltage is programmed with a simple resistor divider from VOUT to ADJ to GND. The TC1070, TC1071, and TC1187 are stable with an output capacitor of only 1µF and have a maximum output ...

Microchip Technology TC1070 Product Info

16 April 2026 0

Parameters

VIN Min (V) V (volt)

2.7

VIN Max V (volt)

6

IOUT #1 Max mA (milliampere)

50

Rated IOUT Max mA (milliampere)

50

Quiescent Current µA (microampere)

50

Voltage Drop Typ (mV)

85

Adjustable VOUT

Yes

Reverse Battery

No

Bypass Pin

No

Current Limit

Yes

Shutdown EN

Yes

Power Good Signal

No

Thermal Shutdown

Yes

Features

  • Low Ground Current for Longer Battery Life
  • Adjustable Output Voltage
  • Very Low Dropout Voltage
  • Choice of 50mA, 100mA, 150mA Output (TC1070, TC1071, TC1187, Respectively)
  • Power-Saving Shutdown Mode
  • Over-Current and Over-Tempeature Protection
  • Pin Compatible with Bipolar Regulators

Description

The TC1070, TC1071, and TC1187 are adjustable LDOs designed to supersede a variety of older (bipolar) voltage regulators. Total supply current is typically 50µA at full load, (20 to 60 times lower than in bipolar regulators). The devices’ key features include ultra low noise operation, very low dropout voltage — typically 85mV (TC1070); 180mV (TC1071); and 270mV (TC1187) at full load, and fast response to step changes in load. Supply current is reduced to 0.5 µA (max) when the shutdown input is low. The devices incorporate both over-temperature and over-current protection. Output voltage is programmed with a simple resistor divider from VOUT to ADJ to GND. The TC1070, TC1071, and TC1187 are stable with an output capacitor of only 1µF and have a maximum output current of 50mA, 100mA, and 150mA, respectively. For higher output versions, please see the TC1174 (IOUT = 300mA) data sheet.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request