0
S70KS1283GABHV020
  • S70KS1283GABHV020

S70KS1283GABHV020

Active and preferred

S70KS1283GABHV020 is a 128 Mb HYPERRAM™ self-refresh DRAM (PSRAM) for high-bandwidth buffer memory over an Octal xSPI interface. It runs from 1.8 V-only VCC/VCCQ (1.7 V to 2.0 V) and uses an 8-bit DQ bus with RWDS plus RESET#. 200 MHz DDR transfers deliver up to 400 MBps throughput with 35 ns tACC, supporting linear or wrapped burst lengths to 128 bytes. The 24-ball FBGA Industrial Plus grade is rated -40 to 105°C.

Infineon Technologies S70KS1283GABHV020 Product Info

16 April 2026 6

Parameters

Density

128 MBit

Family

KS-3

Initial Access Time

35 ns

Interface Bandwidth

400 MByte/s

Interface Frequency (SDR/DDR) (MHz)

- / 200

Interfaces

xSPI (Octal)

Lead Ball Finish

N/A

Operating Temperature range

-40 °C to 105 °C

Operating Voltage range

1.7 V to 2 V

Operating Voltage

1.8 V

Peak Reflow Temp

260 °C

Planned to be available until at least

See roadmap

Qualification

Industrial

Technology

HYPERRAM

Features

  • Octal xSPI interface
  • 1.7 V to 2.0 V VCC/VCCQ
  • 2.7 V to 3.6 V VCC/VCCQ
  • 200 MHz maximum clock rate
  • DDR on both clock edges
  • Throughput up to 400 MBps
  • 8-bit DQ[7:0] data bus
  • RWDS strobe and write data mask
  • Optional differential clock CK/CK#
  • Optional DCARS read strobe
  • Linear and wrapped burst modes
  • Hybrid Sleep and Deep Power Down

Description

  • Octal DDR boosts system bandwidth
  • 400 MBps supports fast frame buffers
  • 200 MHz fits high-speed controllers
  • 8-bit bus reduces signal routing
  • RWDS eases DDR timing margins
  • DCARS improves DDR read eye margin
  • Wrapped bursts reduce access latency
  • Burst modes match cache or streaming
  • Sleep/DPD lowers standby power
  • Partial refresh cuts idle refresh power
  • Dual-voltage fits 1.8 V or 3.0 V rails
  • RESET# enables quick fault recovery

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request