0
S29GL01GT11DHB010
  • S29GL01GT11DHB010

S29GL01GT11DHB010

Active and preferred

The S29GL01GT11DHB010 is a 1 Gb (128 MB) MIRRORBIT™ flash memory with a 3.0 V core and versatile I/O voltage from 1.65 V to 3.6 V. It delivers random access times of 110 ns and page mode reads down to 15 ns, with a 512-byte programming buffer for fast writes. Uniform 128 KB sector architecture, internal ECC, and advanced sector protection enhance reliability. Qualified for automotive use (AEC-Q100 Grade 2, -40°C to +105°C), it supports 100,000 cycles and 20-year retention.

Infineon Technologies S29GL01GT11DHB010 Product Info

16 April 2026 0

Parameters

Density

1 GBit

Family

GL-T

Initial Access Time

110 ns

Interface Frequency (SDR/DDR) (MHz)

NA

Interfaces

Parallel

Lead Ball Finish

Sn/Ag/Cu

Operating Temperature range

-40 °C to 105 °C

Operating Voltage range

2.7 V to 3.6 V

Operating Voltage

3 V

Page Access Time

15 ns

Peak Reflow Temp

260 °C

Planned to be available until at least

2035

Qualification

Automotive

Features

  • 45-nm MIRRORBIT™ technology
  • Single supply for read/program/erase
  • Versatile I/O voltage (1.65 V to VCC)
  • ×8/×16 data bus
  • 512-byte programming buffer
  • Hardware ECC with single bit correction
  • Uniform 128-KB sectors
  • Advanced sector protection (ASP)
  • 100,000 program/erase cycles per sector
  • 20-year data retention (typical)
  • Power-up and low VCC write inhibit
  • Status Register, Data Polling, Ready/Busy pin

Description

  • High density for embedded applications
  • Flexible I/O supports various host systems
  • Fast programming with 512-byte buffer
  • Reliable data with built-in ECC
  • Simplifies memory management with uniform
  • Enhanced data security with ASP
  • Long device lifetime, 100K cycles per sector
  • Retains data up to 20 years
  • Prevents accidental writes during power
  • Easy status monitoring and diagnostics

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request