0
S27KL0643DPBHI020
  • S27KL0643DPBHI020

S27KL0643DPBHI020

Active and preferred

S27KL0643DPBHI020 is a 64 Mb HYPERRAM™ self-refresh DRAM (PSRAM) with an Octal xSPI interface (8-bit DQ plus RWDS and RESET#). It is a 3.0 V-only device (VCC 2.7 V to 3.6 V), supports a 166 MHz max clock and DDR transfers, and offers burst throughput up to 400 MBps with configurable linear or wrapped bursts. It comes in a 24-ball FBGA package and is rated Industrial -40°C to +85°C.

Infineon Technologies S27KL0643DPBHI020 Product Info

16 April 2026 0

Parameters

Density

64 MBit

Family

KL-3

Initial Access Time

36 ns

Interface Bandwidth

333 MByte/s

Interface Frequency (SDR/DDR) (MHz)

- / 166

Interfaces

xSPI (Octal)

Lead Ball Finish

N/A

Operating Temperature range

-40 °C to 85 °C

Operating Voltage range

2.7 V to 3.6 V

Operating Voltage

3 V

Peak Reflow Temp

260 °C

Planned to be available until at least

See roadmap

Qualification

Industrial

Technology

HYPERRAM

Features

  • Octal xSPI with CS# and RWDS
  • 8-bit DQ data bus
  • 1.8 V and 3.0 V interface
  • 200 MHz maximum clock rate
  • DDR transfers on both edges
  • Up to 400 MBps data throughput
  • Burst modes: linear and wrapped
  • Wrap bursts: 16/32/64/128 B
  • Hybrid burst: wrap then linear
  • Configurable output drive strength
  • Hybrid Sleep retains memory data
  • Deep power down stops refresh

Description

  • Octal xSPI reduces routing effort
  • RWDS strobe simplifies DDR design
  • Dual-voltage I/O fits more MCUs
  • 200 MHz supports fast memory access
  • DDR boosts bandwidth per clock
  • 400 MBps enables high-speed buffers
  • Burst modes tune system efficiency
  • Wrapped bursts reduce bus overhead
  • Hybrid burst aids mixed access
  • Drive strength tuning improves SI
  • Hybrid Sleep saves power, keeps data
  • DPD cuts current in idle states

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request