- General
- Packaged in wafer scale package (WSP) for small PCB footprint
- Provides efficient direct connection to battery by employing several integrated switched mode power supplies (DC2DC)
- Seamless integration with TI Sitara and other application processors
- Operating temperature: -40°C to +85°C
- 105°C Extended temperature range is supported only in defined use-case profile
- Wi-Fi
- Baseband processor and RF Transceiver with support for IEEE 802.11b/g/n
- Integrated 2.4G-Hz PA for complete WLAN solution
- Medium access controller
- Hardware-based encryption and decryption using 64-, 128-, and 256-bit WEP, TKIP, or AES keys
- Support Wi-Fi Protected Access (WPA, WPA2, WPA3)and IEEE 802.11i
- IEEE Std 802.11d,e,h,i,k,r PICS Compliant
- 802.11v support for high-precision timing and location approximation
- Supports 4 bit SDIO host interface, including High Speed (H3) and V3 modes
- Bluetooth and Bluetooth Low Energy (WL1831 only)
- Bluetooth 5.1 secure connection compliant and CSA2 support (Declaration ID: D032799)
- Host controller interface (HCI) transport for Bluetooth over UART
- Dedicated audio processor support for SBC encoding and A2DP
- Dual-mode Bluetooth and Bluetooth Low Energy
- TI’s Bluetooth and Bluetooth Low Energy certified stack
- Key Benefits
- Differentiated use cases by configuring WiLink 8 simultaneously in two roles (STA and AP) to connect directly with other Wi-Fi devices on different RF channels (Wi-Fi networks)
- Different provisioning methods for in-home devices - connect to Wi-Fi in one step
- Low Wi-Fi power consumption in connected idle (<800 µA)
- Configurable wake-on-WLAN filters to only wake up the system
- Wi-Fi and Bluetooth single antenna coexistence
- General
- Packaged in wafer scale package (WSP) for small PCB footprint
- Provides efficient direct connection to battery by employing several integrated switched mode power supplies (DC2DC)
- Seamless integration with TI Sitara and other application processors
- Operating temperature: -40°C to +85°C
- 105°C Extended temperature range is supported only in defined use-case profile
- Wi-Fi
- Baseband processor and RF Transceiver with support for IEEE 802.11b/g/n
- Integrated 2.4G-Hz PA for complete WLAN solution
- Medium access controller
- Hardware-based encryption and decryption using 64-, 128-, and 256-bit WEP, TKIP, or AES keys
- Support Wi-Fi Protected Access (WPA, WPA2, WPA3)and IEEE 802.11i
- IEEE Std 802.11d,e,h,i,k,r PICS Compliant
- 802.11v support for high-precision timing and location approximation
- Supports 4 bit SDIO host interface, including High Speed (H3) and V3 modes
- Bluetooth and Bluetooth Low Energy (WL1831 only)
- Bluetooth 5.1 secure connection compliant and CSA2 support (Declaration ID: D032799)
- Host controller interface (HCI) transport for Bluetooth over UART
- Dedicated audio processor support for SBC encoding and A2DP
- Dual-mode Bluetooth and Bluetooth Low Energy
- TI’s Bluetooth and Bluetooth Low Energy certified stack
- Key Benefits
- Differentiated use cases by configuring WiLink 8 simultaneously in two roles (STA and AP) to connect directly with other Wi-Fi devices on different RF channels (Wi-Fi networks)
- Different provisioning methods for in-home devices - connect to Wi-Fi in one step
- Low Wi-Fi power consumption in connected idle (<800 µA)
- Configurable wake-on-WLAN filters to only wake up the system
- Wi-Fi and Bluetooth single antenna coexistence