Product
0
UCC57132
  • UCC57132
  • UCC57132
  • UCC57132
  • UCC57132

UCC57132

ACTIVE

Single-channel 30V VDD, 3A/3A low-side driver with positive OC protection and 12V UVLO

Texas Instruments UCC57132 Product Info

1 April 2026 2

Parameters

Number of channels

1

Power switch

IGBT, MOSFET, SiCFET

Peak output current (A)

3

Input supply voltage (min) (V)

10

Input supply voltage (max) (V)

26

Features

Short circuit protection, Soft turn-off

Operating temperature range (°C)

-40 to 125

Rise time (ns)

8

Fall time (ns)

14

Channel input logic

Non-Inverting

Rating

Catalog

Undervoltage lockout (typ) (V)

12

Driver configuration

Single

Package

SOIC (D)-8-29.4 mm² 4.9 x 6

Features

  • Typical 3A sink 3A source output currents
  • 500mV over-current protection (OCP) threshold
  • Single pin for fault output and enable
  • Programmable fault clear time and over current detection response time
  • Absolute maximum VDD voltage: 30V
  • Tight UVLO threshold for bias flexibility
  • Typical 26ns propagation delay
  • Self-protect driver with thermal shutdown function at 180°C
  • Available in 5mm x 4mm SOIC-8 package
  • Operating junction temperature range of –40°C to 150°C
  • Typical 3A sink 3A source output currents
  • 500mV over-current protection (OCP) threshold
  • Single pin for fault output and enable
  • Programmable fault clear time and over current detection response time
  • Absolute maximum VDD voltage: 30V
  • Tight UVLO threshold for bias flexibility
  • Typical 26ns propagation delay
  • Self-protect driver with thermal shutdown function at 180°C
  • Available in 5mm x 4mm SOIC-8 package
  • Operating junction temperature range of –40°C to 150°C

Description

The UCC5713x is a single channel, high-performance, low-side gate driver capable of effectively driving MOSFET, IGBT and SiC power switches. The UCC5713x has a typical peak drive strength of 3A.

The UCC5713x provide the over current protection with the OCP pin. When the over current signal detected on the OCP pin, the internal circuit will pull down the EN/FLT pin to report fault and force the OUT to low stage. Externall pull up circuir on the EN/FLT is required during the normal operation of the driver. Pulling the EN/FLT low will disable the driver. The EN/FLT would also report the under voltage lock out (UVLO) fault on VDD and the over temperature fault. The UCC5713x provide both 8V and 12V UVLO option for SiC and IGBT applications.

Subscribe to Welllinkchips !
Your Name
* Email
Popular Posts
Featured Parts More >
Submit a request
CONTACT US
Company address

WELL LINK CHIPS GROUP CO.,LIMITED FLAT/RM 1802 BEVERLY HOUSE 93-107 LOCKHART ROAD WANCHAI HK

Send Enquiry
SEND e-MAIL
Office hour from 9am to 6pm ,
Monday through Friday, UTC/GMT +8