0
TRF0213-SEP
  • TRF0213-SEP
  • TRF0213-SEP
  • TRF0213-SEP

TRF0213-SEP

ACTIVE

Radiation-tolerant, near-DC to 14-GHz, single-ended to differential (S2D) RF Amplifier

Texas Instruments TRF0213-SEP Product Info

1 April 2026 5

Parameters

Type

RF FDA

Frequency (min) (MHz)

0.01

Frequency (max) (MHz)

14000

Gain (typ) (dB)

13.8

Noise figure (typ) (dB)

8.9

OIP3 (typ) (dBm)

31

P1dB (typ) (dBm)

13.4

Frequency of harmonic distortion measurement (GHz)

4

3rd harmonic (dBc)

-55

OIP2 (typ) (dBm)

53

2nd harmonic (dBc)

-53

Supply voltage (V)

5

Current consumption (mA)

174

Number of channels

1

Operating temperature range (°C)

-55 to 125

Rating

Catalog, Space

Output enable

Yes

Radiation, SEL (MeV·cm2/mg)

43

Radiation, TID (typ) (rad)

30000

Package

WQFN-FCRLF (RPV)-12-4 mm² 2 x 2

Features

  • Vendor item drawing number: VID V62/25656
  • Radiation:
    • Total ionizing dose (TID)
      • Radiation hardness assurance (RHA) up to 30krad (Si) TID
      • Enhanced low dose rate sensitivity (ELDRS) free process
      • High dose rate radiation lot acceptance testing (HDR RLAT) up to 30krad (Si) TID
    • Single event effects (SEE)
      • Single event latch-up (SEL) immune to linear energy transfer (LET) of 43MeV‑cm2/mg
      • Single event transient (SET) characterized to LET of 43MeV‑cm2/mg
  • Space-enhanced plastic (Space EP, SEP)
    • Lead-free construction
    • Extended temperature range: –55°C to +125°C
  • Single-ended input, differential output
  • Excellent performance driving RF ADCs
  • Fixed 14dB gain
  • Bandwidth (3dB): >14GHz
  • Gain flatness (1dB): 12GHz
  • OIP3: 31dBm (4GHz), 31dBm (10GHz)
  • OP1dB: 13.4dBm (4GHz), 15.4dBm (10GHz)
  • NF: 8.9dB (4GHz), 10.6dB (10GHz)
  • Gain and phase imbalance: ±0.3dB and ±3º
  • Power-down feature
  • 5V single-supply operation
  • Active current: 174mA
  • Vendor item drawing number: VID V62/25656
  • Radiation:
    • Total ionizing dose (TID)
      • Radiation hardness assurance (RHA) up to 30krad (Si) TID
      • Enhanced low dose rate sensitivity (ELDRS) free process
      • High dose rate radiation lot acceptance testing (HDR RLAT) up to 30krad (Si) TID
    • Single event effects (SEE)
      • Single event latch-up (SEL) immune to linear energy transfer (LET) of 43MeV‑cm2/mg
      • Single event transient (SET) characterized to LET of 43MeV‑cm2/mg
  • Space-enhanced plastic (Space EP, SEP)
    • Lead-free construction
    • Extended temperature range: –55°C to +125°C
  • Single-ended input, differential output
  • Excellent performance driving RF ADCs
  • Fixed 14dB gain
  • Bandwidth (3dB): >14GHz
  • Gain flatness (1dB): 12GHz
  • OIP3: 31dBm (4GHz), 31dBm (10GHz)
  • OP1dB: 13.4dBm (4GHz), 15.4dBm (10GHz)
  • NF: 8.9dB (4GHz), 10.6dB (10GHz)
  • Gain and phase imbalance: ±0.3dB and ±3º
  • Power-down feature
  • 5V single-supply operation
  • Active current: 174mA

Description

The TRF0213-SEP is a very high performance, radio frequency (RF) amplifier optimized for RF applications. This device is excellent for ac-coupled applications that require a single-ended to differential conversion when driving an RF sampling analog-to-digital converter (ADC) such as the high performance AFE7950-SEP or ADC12DJ5200-SEP. The device combines the functionality of a wide-band gain block and a wide-band passive balun. The on-chip matching components simplify printed circuit board (PCB) implementation and provide the highest performance over the usable bandwidth. The device is fabricated in Texas Instruments’ advanced complementary BiCMOS process and is available in a space-saving, WQFN-FCRLF package.

The TRF0213-SEP operates on a single-rail supply and consumes about 174mA of active current. A power-down feature is also available for power savings.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request