0
TPSM8F7420
  • TPSM8F7420

TPSM8F7420

ACTIVE

4V to 17V, current mode, quad 4A stackable step-down power module

Texas Instruments TPSM8F7420 Product Info

1 April 2026 5

Parameters

Rating

Catalog

Topology

Buck, Synchronous Buck

Iout (max) (A)

4, 8, 12, 16

Vin (max) (V)

17

Vin (min) (V)

4

Vout (max) (V)

11

Vout (min) (V)

0.6

Features

Adjustable soft start, Adjustable switching frequency, Enable, External Sync, Frequency synchronization, Overcurrent protection, Overvoltage protection, Phase Interleaving, Power good, Stackable, UVLO, Undervoltage protection

Operating temperature range (°C)

-40 to 125

Type

Module

Duty cycle (max) (%)

92

Control mode

current mode control

Switching frequency (min) (kHz)

400

Switching frequency (max) (kHz)

2200

Package

FCCSP (APG)-112-84 mm² 12 x 7

Features

  • Fixed-frequency, peak current mode (PCM) control
  • Small form factor 12.0mm x 7.0mm x 2.4mm, overmolded BGA power module
  • Four independent synchronous buck outputs
  • Supports 2, 3, and 4-phase stackability for higher output current
  • High-efficiency, integrated MOSFETs, inductor, and basic passives.
  • 4V to 17V input voltage range
  • 0.6V to 11V output voltage range
  • Selectable internal or external compensation
  • Continuously adjustable switching frequency from 400kHz to 2.2MHz
  • Synchronizable to an external clock
  • 0.6V, ±0.75% voltage reference accuracy over the full temperature range
  • Sequencing features
    • Enable with adjustable input UVLO
    • Power-good output monitor
    • Output discharge
    • Monotonic start-up into prebiased outputs
    • Adjustable soft-start time with external SS pin
  • Output overvoltage (OV), undervoltage (UV), overcurrent (OC), and thermal shutdown protection
  • Analog temperature output on the MSEL1/2 pins
  • –40°C to 125°C module temperature range
  • Create a custom design using TPSM8F7x20 with the WEBENCH® Power Designer
  • Fixed-frequency, peak current mode (PCM) control
  • Small form factor 12.0mm x 7.0mm x 2.4mm, overmolded BGA power module
  • Four independent synchronous buck outputs
  • Supports 2, 3, and 4-phase stackability for higher output current
  • High-efficiency, integrated MOSFETs, inductor, and basic passives.
  • 4V to 17V input voltage range
  • 0.6V to 11V output voltage range
  • Selectable internal or external compensation
  • Continuously adjustable switching frequency from 400kHz to 2.2MHz
  • Synchronizable to an external clock
  • 0.6V, ±0.75% voltage reference accuracy over the full temperature range
  • Sequencing features
    • Enable with adjustable input UVLO
    • Power-good output monitor
    • Output discharge
    • Monotonic start-up into prebiased outputs
    • Adjustable soft-start time with external SS pin
  • Output overvoltage (OV), undervoltage (UV), overcurrent (OC), and thermal shutdown protection
  • Analog temperature output on the MSEL1/2 pins
  • –40°C to 125°C module temperature range
  • Create a custom design using TPSM8F7x20 with the WEBENCH® Power Designer

Description

The TPSM8F7x20 is a power-dense quad-channel buck power module designed to provide efficient and reliable power conversion for a wide output voltage range from 0.6V to 11V. The module integrates MOSFETs, inductor, and select capacitors to reduce board space and layout complexity. The module can be configured into both multiphase and multi-output rails by supporting 2, 3, and 4-phase stackability with interleaved phases. Under steady-state conditions the module operates in FCCM with a fixed-frequency that is resistor adjustable from 400kHz to 2.2MHz and synchronizable to an external clock.

TPSM8F7x20 module employs current mode control with internal and external compensation. Sequencing requirements are easily met with the external soft-start, active output discharge, adjustable EN, and power-good features. A full suite of protection features (output OV and UV, input UVLO, TSD, OC) are also included for robustness.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request