0
TPS73801-SEP
  • TPS73801-SEP
  • TPS73801-SEP
  • TPS73801-SEP

TPS73801-SEP

ACTIVE

Radiation-tolerant, 2.2-V to 20-V input, 1-A adjustable LDO regulator in a plastic package

Texas Instruments TPS73801-SEP Product Info

1 April 2026 15

Parameters

Rating

Space

Vin (max) (V)

20

Vin (min) (V)

2.2

Iout (max) (A)

1

Output options

Adjustable Output

Vout (max) (V)

19.2

Vout (min) (V)

1.21

Noise (µVrms)

45

PSRR at 100 KHz (dB)

45

Iq (typ) (mA)

1

Features

Enable

Thermal resistance θJA (°C/W)

50.5

Load capacitance (min) (µF)

10

Regulated outputs (#)

1

Accuracy (%)

3

Dropout voltage (Vdo) (typ) (mV)

240

Operating temperature range (°C)

-55 to 125

Radiation, SEL (MeV·cm2/mg)

43

Radiation, TID (typ) (krad)

50

Package

SOT-223 (DCQ)-6-45.89 mm² 6.5 x 7.06

Features

  • VID V62/18616
  • Radiation hardened
    • SEL, SEB, and SEGR immune up to LET = 43 MeV-cm2/mg
    • SET and SEFI characterized up to LET = 43 MeV-cm2/mg
    • TID assured for every wafer lot up to 20 krad(Si)
    • TID characterized up to 50 krad(Si)
  • Space enhanced plastic
    • Au bondwire and NiPdAu lead finish
    • Enhanced mold compound for low outgassing
    • One fabrication, assembly, and test site
    • Extended product life cycle
    • Extended product change notification
    • Product traceability
  • Optimized for fast transient response
  • Output current: 1 A
  • Dropout voltage: 300 mV
  • Low noise: 45 µVRMS (10 Hz to 100 kHz)
  • 1-mA quiescent current
  • No protection diodes needed
  • Controlled quiescent current in dropout
  • Adjustable output voltage: 1.21 V to 20 V
  • Less than 1-µA quiescent current in shutdown
  • Stable with 10-µF output capacitor
  • Stable with ceramic capacitors
  • Reverse-battery protection
  • No reverse current
  • Thermal limiting
  • VID V62/18616
  • Radiation hardened
    • SEL, SEB, and SEGR immune up to LET = 43 MeV-cm2/mg
    • SET and SEFI characterized up to LET = 43 MeV-cm2/mg
    • TID assured for every wafer lot up to 20 krad(Si)
    • TID characterized up to 50 krad(Si)
  • Space enhanced plastic
    • Au bondwire and NiPdAu lead finish
    • Enhanced mold compound for low outgassing
    • One fabrication, assembly, and test site
    • Extended product life cycle
    • Extended product change notification
    • Product traceability
  • Optimized for fast transient response
  • Output current: 1 A
  • Dropout voltage: 300 mV
  • Low noise: 45 µVRMS (10 Hz to 100 kHz)
  • 1-mA quiescent current
  • No protection diodes needed
  • Controlled quiescent current in dropout
  • Adjustable output voltage: 1.21 V to 20 V
  • Less than 1-µA quiescent current in shutdown
  • Stable with 10-µF output capacitor
  • Stable with ceramic capacitors
  • Reverse-battery protection
  • No reverse current
  • Thermal limiting

Description

The TPS73801-SEP is a low-dropout (LDO) regulator optimized for fast transient response. The device can supply 1 A of output current with a dropout voltage of 300 mV. Operating quiescent current is 1 mA and drops to less than 1 µA in shutdown. Compared to many other regulators, quiescent current is well controlled and does not rise in dropout. In addition to fast transient response, a very low output noise makes the TPS73801-SEP regulator ideal for sensitive RF supply applications.

Output voltage range is from 1.21 to 20 V and is stable with use of output capacitors as low as 10 µF. Small ceramic capacitors can be used without the necessary addition of ESR. Internal protection circuitry includes reverse-battery protection, current limiting, thermal limiting, and reverse-current protection. The TPS73801-SEP regulator is available with an adjustable 1.21-V reference voltage and in the 6-pin TO-223 (DCQ) package.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request