0
TPS732-Q1
  • TPS732-Q1
  • TPS732-Q1
  • TPS732-Q1
  • TPS732-Q1

TPS732-Q1

ACTIVE

Automotive 250-mA, high-accuracy, low-dropout voltage regulator with reverse current protection

Texas Instruments TPS732-Q1 Product Info

1 April 2026 6

Parameters

Rating

Automotive

Vin (max) (V)

5.5

Vin (min) (V)

1.7

Iout (max) (A)

0.25

Output options

Adjustable Output, Fixed Output

Vout (max) (V)

5.4

Vout (min) (V)

1.2

Fixed output options (V)

1.8, 5, 5.4

Noise (µVrms)

30

PSRR at 100 KHz (dB)

16

Iq (typ) (mA)

0.4

Features

Enable, Foldback Overcurrent protection, Reverse Current Protection

Thermal resistance θJA (°C/W)

48, 83.8, 179.0

TI functional safety category

Functional Safety-Capable

Load capacitance (min) (µF)

0

Regulated outputs (#)

1

Accuracy (%)

1

Dropout voltage (Vdo) (typ) (mV)

40

Operating temperature range (°C)

-40 to 125

Package

SOT-223 (DCQ)-6-45.89 mm² 6.5 x 7.06

Features

  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 0: –40°C to 150°C, TA
    • Device HBM classification level 2
    • Device CDM classification level C4B
    • Device MM classification level M2
  • Stable with no output capacitor or any value or type of capacitor
  • Input voltage range: 1.7V to 5.5V
  • Ultra-low dropout voltage: 40mV typical at 250mA
  • Excellent load transient response—with or without optional output capacitor
  • NMOS topology provides low reverse leakage current
  • Low noise: 30µVRMS typical (10kHz to 100kHz)
  • Initial accuracy: 0.5%
  • 1% overall accuracy (line, load, and temperature)
  • Less than 1µA maximum IQ in shutdown mode
  • Thermal shutdown and specified minimum and maximum current limit protection
  • Available in multiple output voltage versions:
    • Fixed outputs of 1.2V, 1.5V, 1.6V, 1.8V, 2.5V, 3V, 3.3V, and 5V
    • Adjustable outputs from 1.2V to 5.5V
    • Custom outputs available
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 0: –40°C to 150°C, TA
    • Device HBM classification level 2
    • Device CDM classification level C4B
    • Device MM classification level M2
  • Stable with no output capacitor or any value or type of capacitor
  • Input voltage range: 1.7V to 5.5V
  • Ultra-low dropout voltage: 40mV typical at 250mA
  • Excellent load transient response—with or without optional output capacitor
  • NMOS topology provides low reverse leakage current
  • Low noise: 30µVRMS typical (10kHz to 100kHz)
  • Initial accuracy: 0.5%
  • 1% overall accuracy (line, load, and temperature)
  • Less than 1µA maximum IQ in shutdown mode
  • Thermal shutdown and specified minimum and maximum current limit protection
  • Available in multiple output voltage versions:
    • Fixed outputs of 1.2V, 1.5V, 1.6V, 1.8V, 2.5V, 3V, 3.3V, and 5V
    • Adjustable outputs from 1.2V to 5.5V
    • Custom outputs available

Description

The TPS732-Q1 low-dropout (LDO) voltage regulator uses an NMOS topology consisting of an NMOS pass transient in a voltage-follower configuration. This topology is stable using output capacitors with low ESR, and even allows operation without a capacitor. The topology also provides high reverse blockage (low reverse current) and ground pin current that is nearly constant over all values of output current.

The TPS732-Q1 uses an advanced BiCMOS process to yield high precision while delivering low dropout voltages and low ground pin current. Current consumption, when not enabled, is under 1µA and designed for portable applications. The extremely low output noise (30µVRMS with 0.1µF CNR) is designed for powering VCOs. This device is protected by thermal shutdown and foldback current limit.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request