0
TPS61376
  • TPS61376

TPS61376

ACTIVE

25-V, 4.5-A, boost converter with 2.5% accuracy input average current limit & true disconnection

Texas Instruments TPS61376 Product Info

1 April 2026 6

Parameters

Rating

Catalog

Topology

Boost

Vin (max) (V)

23

Vin (min) (V)

2.9

Vout (max) (V)

25

Vout (min) (V)

4.5

Switch current limit (typ) (A)

4.5

Features

Adjustable current limit, Enable, Light-load efficiency, Load Disconnect, Nonsynchronous, UVLO adjustable

Control mode

Peak current mode

Operating temperature range (°C)

-40 to 125

Iq (typ) (A)

0.00008

Duty cycle (max) (%)

90

Package

VQFN-HR (RYH)-13-5 mm² 2.5 x 2

Features

  • Wide input voltage and output voltage range
    • Input voltage range: 2.9V to 23V
    • Output voltage range: 4.5V to 25V
  • Peak inductor current limit up to 4.5A

  • Programmable input average current limit range: 0.1A to 3A

  • Switching frequency: 1.2MHz
  • Integrated two MOSFETs
    • ISO FET: 40mΩ
    • Low-side FET: 50mΩ
  • Safety and robust operation features
    • Output overvoltage protection
    • Cycle-by-cycle overcurrent protection
    • True disconnection between input and output during EN shutdown
    • Thermal shutdown
  • Precise EN/UVLO threshold
  • External loop compensation
  • 2.5mm × 2.0mm HotRod™ Lite VQFN package
  • Wide input voltage and output voltage range
    • Input voltage range: 2.9V to 23V
    • Output voltage range: 4.5V to 25V
  • Peak inductor current limit up to 4.5A

  • Programmable input average current limit range: 0.1A to 3A

  • Switching frequency: 1.2MHz
  • Integrated two MOSFETs
    • ISO FET: 40mΩ
    • Low-side FET: 50mΩ
  • Safety and robust operation features
    • Output overvoltage protection
    • Cycle-by-cycle overcurrent protection
    • True disconnection between input and output during EN shutdown
    • Thermal shutdown
  • Precise EN/UVLO threshold
  • External loop compensation
  • 2.5mm × 2.0mm HotRod™ Lite VQFN package

Description

The TPS61376 is a high voltage non-synchronous boost converter with input average current limit and true load disconnect functions. The input average current limit threshold can be programmed through the ILIM pin from 0.1A to 3.0A. The isolation FET between the VP and SW pin will completely cut off the path between input and output when the device is disabled. The TPS61376 has a wide input voltage range from 2.9V to 23V and output voltage covers up to 25V.

The TPS61376 implements the peak current mode with the adaptive off-time control topology. The device works in PWM mode at moderate to heavy loads. At the light load conditions, the device enters PFM mode to maintain high efficiency over the entire load current range.

The TPS61376 also integrates robust protection features including output overvoltage protection, cycle-by-cycle overcurrent protection and thermal shutdown.

The TPS61376 offers a very small solution size with a 2.5mm × 2.0mm HotRod™ Lite VQFN package.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request