0
TPS61253E
  • TPS61253E
  • TPS61253E
  • TPS61253E
  • TPS61253E
  • TPS61253E
  • TPS61253E

TPS61253E

ACTIVE

3.8-MHz, 5.25-V / 4-A boost converter in 1.2-mm x 1.3-mm WCSP

Texas Instruments TPS61253E Product Info

1 April 2026 4

Parameters

Rating

Catalog

Topology

Boost

Vin (max) (V)

5.5

Vin (min) (V)

2.6

Vout (max) (V)

5.25

Vout (min) (V)

5

Switch current limit (typ) (A)

4.5

Features

Enable, Light-load efficiency, Load Disconnect, Synchronous rectification

Operating temperature range (°C)

-40 to 125

Iq (typ) (A)

0.00005

Duty cycle (max) (%)

100

Package

DSBGA (YFF)-9-1.96000000000000028000000000000001 mm² 1.4000000000000001 x 1.4000000000000001

Features

  • Wide input voltage range from 2.3V to 5.5V (TPS61253A, TPS61253F)
  • Wide input voltage range from 2.5V to 5.5V (Startup>2.6V, TPS61253E)
  • Fixed output voltage: 4.5 / 4.7 / 5.0 / 5.2V / 5.25V
  • Two FETs integrated: 35mΩ LS-FET, 60mΩ HS-FET
  • IOUT ≥ 1500mA continuously at VOUT = 5V and VIN ≥ 3V (TPS61253A, TPS61253F)
  • IOUT ≥ 1500mA continuously at VOUT = 5.25V and VIN ≥ 3V (TPS61253E)
  • 42µA quiescent current from input
  • 4A switching valley current limit (TPS61253A)
  • 4.5A switching valley current limit (TPS61253E, TPS61253F)
  • TPS61253E and TPS61253F support 1.2V I/O

  • TPS612532A output discharge function available

  • 3.8MHz switching frequency
  • Selectable Auto PFM, Forced PWM, and Ultrasonic mode
  • Support pass-through mode
  • ±2% output voltage accuracy
  • 600µs soft-start time
  • Hiccup-mode short protection
  • Load disconnection during shutdown
  • Thermal shutdown
  • Create a custom design using the TPS61253A with the WEBENCH® Power Designer
  • Wide input voltage range from 2.3V to 5.5V (TPS61253A, TPS61253F)
  • Wide input voltage range from 2.5V to 5.5V (Startup>2.6V, TPS61253E)
  • Fixed output voltage: 4.5 / 4.7 / 5.0 / 5.2V / 5.25V
  • Two FETs integrated: 35mΩ LS-FET, 60mΩ HS-FET
  • IOUT ≥ 1500mA continuously at VOUT = 5V and VIN ≥ 3V (TPS61253A, TPS61253F)
  • IOUT ≥ 1500mA continuously at VOUT = 5.25V and VIN ≥ 3V (TPS61253E)
  • 42µA quiescent current from input
  • 4A switching valley current limit (TPS61253A)
  • 4.5A switching valley current limit (TPS61253E, TPS61253F)
  • TPS61253E and TPS61253F support 1.2V I/O

  • TPS612532A output discharge function available

  • 3.8MHz switching frequency
  • Selectable Auto PFM, Forced PWM, and Ultrasonic mode
  • Support pass-through mode
  • ±2% output voltage accuracy
  • 600µs soft-start time
  • Hiccup-mode short protection
  • Load disconnection during shutdown
  • Thermal shutdown
  • Create a custom design using the TPS61253A with the WEBENCH® Power Designer

Description

The TPS61253x device provides a power supply solution for battery-powered portable applications. With the input voltage ranging from 2.3V to 5.5V (TPS61253A, TPS61253F) or 2.5V to 5.5V (TPS61253E), the device supports the applications powered by the Li-Ion batteries with the extended voltage range. Different fixed output voltage versions are available of 4.5V, 4.7V, 5V, 5.2V and 5.25V. The TPS61253x supports up to 1500mA load current from a battery discharged as low as 3V.

The TPS61253x operates at typical 3.8MHz switching frequency. The TPS61253x can be flexibly configured at the Auto PFM mode, forced PWM mode, or ultrasonic mode. The Auto PFM mode can benefit with the high efficiency at the light load. The forced PWM operation can make the switching frequency be constant crossing the whole load range. The ultrasonic mode keeps the switching frequency always larger than 25kHz at any load condition to avoid the acoustic noise.

TPS61253x has a built-in 600µs soft start to avoid the inrush current at start-up. When the output is shorted, the device enters into the hiccup mode and recovers automatically after the short releases. During the shutdown, the load is completely disconnected from the input end with maximum 1.3µA current being consumed.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request