0
TPS22971
  • TPS22971
  • TPS22971

TPS22971

ACTIVE

3.6-V, 3-A, 6.7-mΩ load switch with adj. rise time, power good, and output discharge

Texas Instruments TPS22971 Product Info

1 April 2026 5

Parameters

Imax (A)

3

Vin (max) (V)

3.6

Vin (min) (V)

0.65

Number of channels

1

Features

Inrush current control, Power good signal, Quick output discharge, Thermal shutdown

Quiescent current (Iq) (typ) (µA)

30

Soft start

Adjustable Rise Time

Rating

Catalog

Ron (typ) (mΩ)

6.7

Shutdown current (ISD) (typ) (µA)

1

Current limit type

None

Function

Inrush current control, Power good signal

FET

Internal

Operating temperature range (°C)

-40 to 105

Device type

Load switches

Package

DSBGA (YZP)-8-2.8125 mm² 2.25 x 1.25

Features

  • Input voltage range (VIN): 0.65 V to 3.6 V
  • On-resistance
    • RDS(on) = 6.7 mΩ (typical) at VIN ≥ 1.8 V
    • RDS(on) = 7.2 mΩ (typical) at VIN = 1.05 V
    • RDS(on) = 8.9 mΩ (typical) at VIN = 0.65 V
  • Maximum continuous switch current (IMAX): 3 A
  • ON state (IQ): 30 µA (typical) at 3.6 VIN
  • OFF state (ISD): 1 µA (typical) at 3.6 VIN
  • Adjustable slew rate through CT pin
    • Fast turn-ON ≤ 65 µs at VIN = 1 V
  • Power good (PG) indicator after switch turn ON
  • Low threshold enable (ON) of 0.9 V (VIH) supports use of low voltage control logic
  • Thermal shutdown (TSD)
  • Quick output discharge (QOD): 150-Ω (typical)
  • Input voltage range (VIN): 0.65 V to 3.6 V
  • On-resistance
    • RDS(on) = 6.7 mΩ (typical) at VIN ≥ 1.8 V
    • RDS(on) = 7.2 mΩ (typical) at VIN = 1.05 V
    • RDS(on) = 8.9 mΩ (typical) at VIN = 0.65 V
  • Maximum continuous switch current (IMAX): 3 A
  • ON state (IQ): 30 µA (typical) at 3.6 VIN
  • OFF state (ISD): 1 µA (typical) at 3.6 VIN
  • Adjustable slew rate through CT pin
    • Fast turn-ON ≤ 65 µs at VIN = 1 V
  • Power good (PG) indicator after switch turn ON
  • Low threshold enable (ON) of 0.9 V (VIH) supports use of low voltage control logic
  • Thermal shutdown (TSD)
  • Quick output discharge (QOD): 150-Ω (typical)

Description

The TPS22971 is a space-saving single-channel load switch with controlled and adjustable turn-on slew rate and an integrated power good indicator. the device contains an n-channel mosfet that can operate over a low input voltage range of 0.65 v to 3.6 V and can support a maximum continuous current of 3 A. A low on-resistance of 6.7-mΩ minimizes the power loss and voltage drop across the load switch. The switch is controlled by an on and off input (ON), which is capable of interfacing directly with low-voltage control signals.

By default, the TPS22971 has a fast turn-on time to minimize system startup and wait time. The adjustable slew rate can also be reduced to limit inrush current. A power good (PG) signal internally monitors the gate threshold and indicates when the switch is fully on. When the switch is disabled, a 150-Ω on-chip resistor quickly discharges the output to ground and keeps it from floating.

The TPS22971 is available in an ultra-small, space saving 8-pin WCSP package and is characterized for operation over the free-air temperature range of –40°C to 105°C and integrates thermal shutdown to turn off in case of overheating.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request