0
LM2941QML
  • LM2941QML
  • LM2941QML
  • LM2941QML

LM2941QML

ACTIVE

1A Low Dropout Adjustable Regulator

Texas Instruments LM2941QML Product Info

1 April 2026 4

Parameters

Rating

Military

Vin (max) (V)

26

Vin (min) (V)

6

Iout (max) (A)

1

Output options

Adjustable Output

Vout (max) (V)

20

Vout (min) (V)

5

Fixed output options (V)

0

Noise (µVrms)

600

PSRR at 100 KHz (dB)

67

Iq (typ) (mA)

10

Features

Enable

Thermal resistance θJA (°C/W)

41

Load capacitance (min) (µF)

22

Regulated outputs (#)

1

Accuracy (%)

5

Dropout voltage (Vdo) (typ) (mV)

500

Operating temperature range (°C)

-55 to 125

Package

CFP (NAC)-16-62.9285 mm² 9.91 x 6.35

Features

  • Available with Radiation Ensure
    • ELDRS Free 100 krad(Si)
  • Output Voltage Adjustable from 5V to 20V
  • Dropout Voltage Typically 0.5V at IO = 1A
  • Output Current in Excess of 1A
  • Trimmed Reference Voltage
  • Reverse Battery Protection
  • Internal Short Circuit Current Limit
  • Mirror Image Insertion Protection
  • TTL, CMOS Compatible ON/OFF Switch

All trademarks are the property of their respective owners.

  • Available with Radiation Ensure
    • ELDRS Free 100 krad(Si)
  • Output Voltage Adjustable from 5V to 20V
  • Dropout Voltage Typically 0.5V at IO = 1A
  • Output Current in Excess of 1A
  • Trimmed Reference Voltage
  • Reverse Battery Protection
  • Internal Short Circuit Current Limit
  • Mirror Image Insertion Protection
  • TTL, CMOS Compatible ON/OFF Switch

All trademarks are the property of their respective owners.

Description

The LM2941 positive voltage regulator features the ability to source 1A of output current with a typical dropout voltage of 0.5V and a maximum of 1V over the entire temperature range. Furthermore, a quiescent current reduction circuit has been included which reduces the ground pin current when the differential between the input voltage and the output voltage exceeds approximately 3V. The quiescent current with 1A of output current and an input-output differential of 5V is therefore only 30mA. Higher quiescent currents only exist when the regulator is in the dropout mode (VI − VO ≤ 3V).

Originally designed for vehicular applications, the LM2941 and all regulated circuitry are protected from reverse battery installations or two-battery jumps. During line transients, such as load dump when the input voltage can momentarily exceed the specified maximum operating voltage, the regulator will automatically shut down to protect both the internal circuits and the load. Familiar regulator features such as short circuit and thermal overload protection are also provided.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request