0
TPS22811
  • TPS22811
  • TPS22811

TPS22811

ACTIVE

2.7-V to 16-V, 10-A, 6-mΩ load switch with fast overvoltage protection and current monitoring

Texas Instruments TPS22811 Product Info

1 April 2026 3

Parameters

Imax (A)

10

Vin (max) (V)

16

Vin (min) (V)

2.7

Number of channels

1

Features

Analog current monitor, Overvoltage protection, Power good signal, Quick output discharge, Thermal shutdown, Under voltage lock out

Quiescent current (Iq) (typ) (µA)

430

Soft start

Adjustable Rise Time

Rating

Catalog

Ron (typ) (mΩ)

6

Shutdown current (ISD) (typ) (µA)

3

Current limit type

Adjustable

Function

Current monitoring, Inrush current control, Power good signal, Thermal shutdown

FET

Internal

Operating temperature range (°C)

-40 to 125

Device type

Load switches

Package

VQFN-HR (RPW)-10-4 mm² 2 x 2

Features

  • Wide operating input voltage range: 2.7 V to 16 V
    • 20-V absolute maximum
  • Integrated FET with low on-resistance: RON = 6 mΩ (typ.)
  • Adjustable output slew rate control (dVdt)
  • Active high enable input with adjustable undervoltage lockout threshold (UVLO)
  • Active low enable input with adjustable undervoltage lockout threshold (OVLO)
  • Fast overvoltage protection
    • Adjustable overvoltage lockout (OVLO) with 1.2-µs (typ.) response time
  • Analog load current monitor output (IMON)
      • ±9 % accuracy for IOUT > 3 A
  • Fast-trip response for short-circuit protection in steady-state
    • 640-ns (typ.) response time
    • Fixed threshold
  • Overtemperature protection
  • Power-good (PG) indication with adjustable threshold (PGTH)

  • Quick Output Discharge
  • Small footprint: QFN 2 mm × 2 mm, 0.45-mm pitch
  • Wide operating input voltage range: 2.7 V to 16 V
    • 20-V absolute maximum
  • Integrated FET with low on-resistance: RON = 6 mΩ (typ.)
  • Adjustable output slew rate control (dVdt)
  • Active high enable input with adjustable undervoltage lockout threshold (UVLO)
  • Active low enable input with adjustable undervoltage lockout threshold (OVLO)
  • Fast overvoltage protection
    • Adjustable overvoltage lockout (OVLO) with 1.2-µs (typ.) response time
  • Analog load current monitor output (IMON)
      • ±9 % accuracy for IOUT > 3 A
  • Fast-trip response for short-circuit protection in steady-state
    • 640-ns (typ.) response time
    • Fixed threshold
  • Overtemperature protection
  • Power-good (PG) indication with adjustable threshold (PGTH)

  • Quick Output Discharge
  • Small footprint: QFN 2 mm × 2 mm, 0.45-mm pitch

Description

The TPS22811x is a highly-integrated, power-distribution solution in a small package. The device allows control and monitoring of power supply rails using minimum number of external components.

Output slew rate and inrush current can be adjusted using one external capacitor. Loads are protected from input overvoltage conditions by cutting off the output if input exceeds an adjustable overvoltage threshold. The device integrates a fast-trip response to provide protection against severe faults at the output during steady-state.

The devices provide an accurate analog sense of the output load current as well as a digital power-good indication to help with system monitoring and diagnostics.

The devices are available in a 2-mm × 2-mm, 10-pin HotRod™ QFN package for improved thermal performance and reduced system footprint.

The devices are characterized for operation over a junction temperature range of –40°C to +125°C.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request