0
TPA6304-Q1
  • TPA6304-Q1
  • TPA6304-Q1
  • TPA6304-Q1

TPA6304-Q1

ACTIVE

45-W, 2.1-MHz analog input 4-channel automotive Class-D Burr-Brown™ audio amplifier

Texas Instruments TPA6304-Q1 Product Info

1 April 2026 12

Parameters

Output power (W)

45

Power stage supply (max) (V)

18

Power stage supply (min) (V)

4.5

Speaker channels (max)

4

Features

thermal pad up

Audio input type

Analog Input

Control interface

I2C

THD + N at 1 kHz (%)

0.09

Switching frequency (max) (Hz)

2300000

Output noise voltage (µV)

35

Sampling rate (max) (Hz)

96000

Rating

Automotive

Operating temperature range (°C)

-40 to 125

Package

HTSSOP (DDV)-44-113.4 mm² 14 x 8.1

Features

  • Highest efficiency Class-D
    • Significantly more efficient than Class-AB
    • Reduce thermal solution with 75% less heat dissipation than Class-AB
  • Start/stop operation down to 4.5 V
  • AEC-Q100 Qualified for automotive applications:
    • Temperature grade 1: –40°C to 125°C TA
    • HBM ESD Classification level 2
    • CDM ESD Classification level C2B
  • 27 W, 10% THD into 4 Ω at 14.4 V
    • Drives 4 Ω and 2 Ω loads
  • Load diagnostics
    • Output open, shorted load
    • Output-to-battery or ground shorts
    • Tweeter connected
  • Designed with advanced gate drive to meet CISPR25-L5 EMC specification
    • Class-D at 2.1 MHz, no AM interference
    • Spread Spectrum mode, Phase Offset, Slew Rate Control
  • Protection
    • 40 V Load dump
    • Output short protection
    • DC offset and over temperature
    • Fortuitous open ground and power tolerant
  • Audio inputs
    • 4 Channel single-ended analog input
    • 10 dB, 16 dB, 22 dB or 28 dB Gain option
  • Supports parallel channel drive (PBTL)
  • Audio performance into 4 Ω at 14.4 V, 1 kHz
    • THD+N < 0.006%
    • 42 µVRMS Output Noise
    • 80 dB PSRR
    • Efficiency > 80%
  • Special features
    • Programmable clip detection
    • Load current limiter
    • Thermal gain foldback
    • Fast and autonomous startup diagnostics
    • AC load impedance measurement with < 10 mA load current
  • Highest efficiency Class-D
    • Significantly more efficient than Class-AB
    • Reduce thermal solution with 75% less heat dissipation than Class-AB
  • Start/stop operation down to 4.5 V
  • AEC-Q100 Qualified for automotive applications:
    • Temperature grade 1: –40°C to 125°C TA
    • HBM ESD Classification level 2
    • CDM ESD Classification level C2B
  • 27 W, 10% THD into 4 Ω at 14.4 V
    • Drives 4 Ω and 2 Ω loads
  • Load diagnostics
    • Output open, shorted load
    • Output-to-battery or ground shorts
    • Tweeter connected
  • Designed with advanced gate drive to meet CISPR25-L5 EMC specification
    • Class-D at 2.1 MHz, no AM interference
    • Spread Spectrum mode, Phase Offset, Slew Rate Control
  • Protection
    • 40 V Load dump
    • Output short protection
    • DC offset and over temperature
    • Fortuitous open ground and power tolerant
  • Audio inputs
    • 4 Channel single-ended analog input
    • 10 dB, 16 dB, 22 dB or 28 dB Gain option
  • Supports parallel channel drive (PBTL)
  • Audio performance into 4 Ω at 14.4 V, 1 kHz
    • THD+N < 0.006%
    • 42 µVRMS Output Noise
    • 80 dB PSRR
    • Efficiency > 80%
  • Special features
    • Programmable clip detection
    • Load current limiter
    • Thermal gain foldback
    • Fast and autonomous startup diagnostics
    • AC load impedance measurement with < 10 mA load current

Description

The TPA6304-Q1 device is a four-channel analog-input Class-D Burr-Brown™ audio amplifier that implements a 2.1 MHz PWM switching frequency that enables a cost optimized solution in a very small 2.7 cm2 PCB size, high impedance single ended inputs and full operation down to 4.5 V for start/stop events.

The TPA6304-Q1 Class-D audio amplifier has an optimal design for use in entry level automotive head units that provide analog audio input signals as part of their system design. The Class-D topology dramatically improves efficiency over traditional linear amplifier solutions.

The output switching frequency can be set either above the AM band, which eliminates the AM band interference and reduces output filter size and cost, or below AM band to further optimize efficiency.

The device is offered in a 44 pin HTSSOP package with the exposed thermal pad up.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request