0
TMP422-EP
  • TMP422-EP

TMP422-EP

ACTIVE

Dual remote and local temperature sensor with N-factor and series-R correction

Texas Instruments TMP422-EP Product Info

1 April 2026 4

Parameters

Local sensor accuracy (max)

2.5

Type

Remote

Operating temperature range (°C)

-55 to 125

Supply voltage (min) (V)

2.7

Interface type

I2C, SMBus

Supply voltage (max) (V)

5.5

Features

One-shot conversion

Supply current (max) (µA)

38

Temp resolution (max) (bps)

12

Remote channels (#)

2

Addresses

4

Rating

HiRel Enhanced Product

Package

SOT-23 (DCN)-8-4.64 mm² 2.9 x 1.6

Features

  • SOT23-8 Package
  • ±17deg;C Remote Diode Sensor (Max)
  • ±2.5°C Local Temperature Sensor (Max)
  • Series Resistance Cancellation
  • n-Factor Correction
  • Two-Wire/SMBus Serial Interface
  • Multiple Interface Addresses
  • Diode Fault Detection
  • RoHS Compliant and NO Sb/Br
  • SOT23-8 Package
  • ±17deg;C Remote Diode Sensor (Max)
  • ±2.5°C Local Temperature Sensor (Max)
  • Series Resistance Cancellation
  • n-Factor Correction
  • Two-Wire/SMBus Serial Interface
  • Multiple Interface Addresses
  • Diode Fault Detection
  • RoHS Compliant and NO Sb/Br

Description

The TMP422 is a remote temperature sensor monitor with a built-in local temperature sensor. The remote temperature sensor diode-connected transistors are typically low-cost, NPN- or PNP-type transistors or diodes that are an integral part of microcontrollers, microprocessors, or FPGAs.

Remote accuracy is ±1°C for multiple IC manufacturers, with no calibration needed. The two-wire serial interface accepts SMBus write byte, read byte, send byte, and receive byte commands to configure the device.

The TMP422 includes series resistance cancellation, programmable non-ideality factor, wide remote temperature measurement range (up to 150°C), and diode fault detection.

The TMP422 is available in a SOT23-8 package.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request