0
TMP275-Q1
  • TMP275-Q1
  • TMP275-Q1

TMP275-Q1

ACTIVE

Automotive ±0.75°C Temp Sensor with I2C/SMBus Interface in Industry Std LM75 Form Factor & Pinout

Texas Instruments TMP275-Q1 Product Info

1 April 2026 4

Parameters

Local sensor accuracy (max)

0.5

Type

Local

Operating temperature range (°C)

-40 to 125

Supply voltage (min) (V)

2.7

Interface type

I2C, SMBus

Supply voltage (max) (V)

5.5

Features

ALERT, One-shot conversion

Supply current (max) (µA)

85

Temp resolution (max) (bps)

12

Remote channels (#)

0

Addresses

8

Rating

Automotive

Package

SOIC (D)-8-29.4 mm² 4.9 x 6

Features

  • AEC-Q100 Qualified with:
    • Temperature Grade 1: –40°C to +125°C Ambient Operation Temperature Range
    • HBM ESD Classification Level 2
    • CDM ESD Classification Level C6
  • High Accuracy:
    • ±0.75°C (Maximum) from −10°C to +85°C
    • ±1.5°C (Maximum) from −40°C to +125°C
  • Low Quiescent Current:
    • 50 µA (Typical)
    • 0.1 µA (Standby)
  • Resolution: 9 to 12 Bits, User-Selectable
  • Digital Output: SMBus™, Two-Wire, and I2C Interface Compatibility
  • 8 I2C, SMBus Addresses
  • Wide Supply Range: 2.7 V to 5.5 V
  • Small 8-Pin VSSOP and SOIC Packages
  • No Specified Power-Up Sequence Required, Two-Wire Bus Pullups Can Be Enabled Before V+
  • AEC-Q100 Qualified with:
    • Temperature Grade 1: –40°C to +125°C Ambient Operation Temperature Range
    • HBM ESD Classification Level 2
    • CDM ESD Classification Level C6
  • High Accuracy:
    • ±0.75°C (Maximum) from −10°C to +85°C
    • ±1.5°C (Maximum) from −40°C to +125°C
  • Low Quiescent Current:
    • 50 µA (Typical)
    • 0.1 µA (Standby)
  • Resolution: 9 to 12 Bits, User-Selectable
  • Digital Output: SMBus™, Two-Wire, and I2C Interface Compatibility
  • 8 I2C, SMBus Addresses
  • Wide Supply Range: 2.7 V to 5.5 V
  • Small 8-Pin VSSOP and SOIC Packages
  • No Specified Power-Up Sequence Required, Two-Wire Bus Pullups Can Be Enabled Before V+

Description

The TMP275-Q1 is a ±0.75°C, accurate integrated digital temperature sensor with a 12-bit, analog-to-digital converter (ADC) that can operate on a supply voltage as low as 2.7 V and is pin- and register-compatible with the Texas Instruments’ LM75, TMP75, TMP75B, and TMP175 devices. The TMP275-Q1 device is available in 8-pin SOIC and VSSOP packages and requires no external components to sense temperature. The device is capable of reading temperatures with a maximum resolution of 0.0625°C (12 bits) and as low as 0.5°C (9 bits), thus allowing the user to maximize efficiency by programming for higher resolution or faster conversion time. The device is specified over the temperature range of –40°C to +125°C.

The TMP275-Q1 device features SMBus and two-wire interface compatibility and allows up to eight devices on the same bus with the SMBus overtemperature alert function. The factory-calibrated temperature accuracy and the noise-immune digital interface make the TMP275-Q1 the preferred solution for temperature compensation of other sensors and electronic components, without the need for additional system-level calibration or elaborate board layout for distributed temperature sensing.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request