0
ACTIVE
Number of channels |
1 |
Output type |
Push-Pull |
Propagation delay time (µs) |
0.0025 |
Vs (max) (V) |
5.5 |
Vs (min) (V) |
2.4 |
Rating |
Space |
Features |
Adjustable Hysteresis, Latch, POR |
Iq per channel (typ) (mA) |
5.7 |
Vos (offset voltage at 25°C) (max) (mV) |
7 |
Rail-to-rail |
In |
Operating temperature range (°C) |
-55 to 125 |
Input bias current (±) (max) (nA) |
5000 |
VICR (max) (V) |
5.7 |
VICR (min) (V) |
-0.2 |
SOT-23 (DBV)-6-8.12 mm² 2.9 x 2.8
VID V62/22606-01XE
Radiation - Total Ionizing Dose (TID)
TID Characterized to 30krad (Si)
ELDRS-Free to 30krad (Si)
RHA/RLAT to 30krad (Si)
Radiation - Single-Event Effects (SEE)
SEL Immune to LET = 43MeV·cm2/mg
SET Characterized to LET = 43MeV·cm2/mg
Space Enhanced Plastic
Controlled Baseline
One Assembly/Test Site
One Fabrication Site
Extended Product Life Cycle
Product Traceability
The TLV1H103-SEP is a 325MHz, high speed comparator with rail-to-rail inputs and a propagation delay of 2.5ns. The combination of fast response and wide operating voltage range make the comparator an excellent choice for narrow signal pulse detection and data and clock recovery applications in radar imaging and communications payload systems.
The push-pull (single-ended) outputs of the TLV1H103-SEP simplify and save cost on board-to-board wiring for I/O interfaces while reducing power consumption when compared to alternative high-speed differential output comparators. In addition, the TLV1H103-SEP offers the features such as adjustable hysteresis control and output latch capability. The comparator can directly interface most prevailing digital controllers and IO expanders in the downstream.
The TLV1H103-SEP uses a high-speed complementary BiCMOS process and is available in a 6-pin, SOT-23 package.
WELL LINK CHIPS GROUP CO.,LIMITED FLAT/RM 1802 BEVERLY HOUSE 93-107 LOCKHART ROAD WANCHAI HK
