0
THS4541-DIE
  • THS4541-DIE
  • THS4541-DIE
  • THS4541-DIE

THS4541-DIE

ACTIVE

Bare die 850-MHz precision fully differential amplifier

Texas Instruments THS4541-DIE Product Info

1 April 2026 9

Parameters

Number of channels

1

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.7

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.4

BW at Acl (MHz)

620

Acl, min spec gain (V/V)

1

Slew rate (typ) (V/µs)

1500

Architecture

Bipolar, Fully Differential ADC Driver

Vn at flatband (typ) (nV√Hz)

2.2

Iq per channel (typ) (mA)

10.1

Rail-to-rail

In to V-, Out

Vos (offset voltage at 25°C) (max) (mV)

0.45

Operating temperature range (°C)

-40 to 125

Iout (typ) (mA)

100

2nd harmonic (dBc)

140

3rd harmonic (dBc)

140

Frequency of harmonic distortion measurement (MHz)

0.1

GBW (typ) (MHz)

850

Input bias current (max) (pA)

13000000

Features

Shutdown

CMRR (typ) (dB)

100

Rating

Catalog

Package

DIESALE (Y)-—-See data sheet

Features

  • Bandwidth: 500 MHz (G = 2 V/V)
  • Gain bandwidth product: 850 MHz
  • Slew rate: 1500 V/µs
  • HD2: –95 dBc at 10 MHz (2 VPP, RL = 500 Ω)
  • HD3: –90 dBc at 10 MHz (2 VPP, RL = 500 Ω)
  • Input voltage noise: 2.2 nV/ √Hz (f > 100 kHz)
  • Low offset drift: ±0.5 µV/°C (typical)
  • Negative rail input (NRI)
  • Rail-to-rail output (RRO)
  • Power supply:
    • Single-supply voltage range: 2.7 V to 5.4 V
    • Split-supply voltage range: ±1.35 V to ±2.7 V
    • Quiescent current: 10.1 mA (5-V supply)
  • Power-down capability: 2 µA (typical)
  • Bandwidth: 500 MHz (G = 2 V/V)
  • Gain bandwidth product: 850 MHz
  • Slew rate: 1500 V/µs
  • HD2: –95 dBc at 10 MHz (2 VPP, RL = 500 Ω)
  • HD3: –90 dBc at 10 MHz (2 VPP, RL = 500 Ω)
  • Input voltage noise: 2.2 nV/ √Hz (f > 100 kHz)
  • Low offset drift: ±0.5 µV/°C (typical)
  • Negative rail input (NRI)
  • Rail-to-rail output (RRO)
  • Power supply:
    • Single-supply voltage range: 2.7 V to 5.4 V
    • Split-supply voltage range: ±1.35 V to ±2.7 V
    • Quiescent current: 10.1 mA (5-V supply)
  • Power-down capability: 2 µA (typical)

Description

The THS4541-DIE is a low-power, voltage-feedback, fully differential amplifier (FDA) with an input common-mode range below the negative rail, and rail-to-rail output. This is a bare die product that can be used in multi-chip modules (MCM), system-in-package (SiP), chip-on-board (COB), hybrids, and systems that require an extremely small size. The THS4541-DIE is designed for low-power data acquisition systems where high density is critical in a high-performance analog-to-digital converter (ADC) or digital-to-analog converter (DAC) interface design.

The THS4541-DIE features the negative-rail input required when interfacing a DC-coupled, ground-centered, source signal. This negative-rail input, with rail-to-rail output, allows for easy interface between single-ended, ground-referenced, bipolar signal sources and a wide variety of successive approximation register (SAR), delta-sigma (ΔΣ), or pipeline ADCs using only a single 2.7 V to 5.4 V power supply.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request