- AEC-Q100 qualified for Automotive applications
- Temperature grade 1: –40°C to +125°C, TA
- General operation
- 4.5V to 19V supply voltage, 40V load dump
- Low latency path reducing group delay by >70% at 48kHz
- Support for 1.8V and 3.3V I/Os
- I2C control with 8 address options
- 1L Modulation
- Requires only one inductor per channel saving four inductors versus a traditional design
- Lower system component cost for inductors
- Smaller PCB footprint
- Audio Performance
- THD+N 0.02% (4Ω, 1W, 1kHz)
- Output noise: 35µVRMS at 14.4V, A-weighting
- Efficiency > 90% at 4×25W, 4Ω, 14.4V
- Output current sensing by channel using I2S or TDM
- No external circuitry needed
- Real-time load diagnostics
- Monitor output conditions while playing audio
- Open Load, Shorted load, Short-to-power, and Short-to-ground detection
- DC and AC Standby load diagnostics
- Audio inputs
- 2-4 channel using I2S or 4-16 channel using TDM
- Input sample rates: 44.1, 48, 96, 192kHz
- Audio outputs
- 4 channel bridge-tied load (BTL), configurable 2 channel parallel-BTL (PBTL)
- 2MHz output switching frequency
- 4×30W (4Ω, 14.4V, 1kHz 10% THD+N)
- 4×50W (2Ω, 14.4V, 1kHz 10% THD+N)
- Advanced spread-spectrum and selectable phase offset
- Protection and Monitoring
- Cycle-by-cycle current limiting
- Output short protection
- Clip detection with configurable thresholds
- Thermal foldback and PVDD foldback
- I2C temperature and supply voltage readout
- Configurable overtemperature warning and individual channel shutdown
- DC offset, undervoltage and overvoltage
- AEC-Q100 qualified for Automotive applications
- Temperature grade 1: –40°C to +125°C, TA
- General operation
- 4.5V to 19V supply voltage, 40V load dump
- Low latency path reducing group delay by >70% at 48kHz
- Support for 1.8V and 3.3V I/Os
- I2C control with 8 address options
- 1L Modulation
- Requires only one inductor per channel saving four inductors versus a traditional design
- Lower system component cost for inductors
- Smaller PCB footprint
- Audio Performance
- THD+N 0.02% (4Ω, 1W, 1kHz)
- Output noise: 35µVRMS at 14.4V, A-weighting
- Efficiency > 90% at 4×25W, 4Ω, 14.4V
- Output current sensing by channel using I2S or TDM
- No external circuitry needed
- Real-time load diagnostics
- Monitor output conditions while playing audio
- Open Load, Shorted load, Short-to-power, and Short-to-ground detection
- DC and AC Standby load diagnostics
- Audio inputs
- 2-4 channel using I2S or 4-16 channel using TDM
- Input sample rates: 44.1, 48, 96, 192kHz
- Audio outputs
- 4 channel bridge-tied load (BTL), configurable 2 channel parallel-BTL (PBTL)
- 2MHz output switching frequency
- 4×30W (4Ω, 14.4V, 1kHz 10% THD+N)
- 4×50W (2Ω, 14.4V, 1kHz 10% THD+N)
- Advanced spread-spectrum and selectable phase offset
- Protection and Monitoring
- Cycle-by-cycle current limiting
- Output short protection
- Clip detection with configurable thresholds
- Thermal foldback and PVDD foldback
- I2C temperature and supply voltage readout
- Configurable overtemperature warning and individual channel shutdown
- DC offset, undervoltage and overvoltage