0
OPA4H838-SEP
  • OPA4H838-SEP

OPA4H838-SEP

PREVIEW

Radiation-tolerant 10MHz, zero-drift, zero-crossover, RRIO precision operational amplifier

Texas Instruments OPA4H838-SEP Product Info

1 April 2026 3

Parameters

Number of channels

4

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.5

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.5

Vos (offset voltage at 25°C) (max) (mV)

0.0105

Offset drift (typ) (µV/°C)

0.005

Input bias current (max) (pA)

500

GBW (typ) (MHz)

10

Features

EMI Hardened, High Cload Drive, Zero Crossover, Zero Drift

Slew rate (typ) (V/µs)

5

Rail-to-rail

In, Out

Iq per channel (typ) (mA)

1.7

Vn at 1 kHz (typ) (nV√Hz)

7

CMRR (typ) (dB)

110

Rating

Space

Operating temperature range (°C)

-55 to 125

Iout (typ) (A)

0.06

Architecture

CMOS

Input common mode headroom (to negative supply) (typ) (V)

-0.1

Input common mode headroom (to positive supply) (typ) (V)

0.1

Output swing headroom (to negative supply) (typ) (V)

0.01

Output swing headroom (to positive supply) (typ) (V)

-0.005

THD + N at 1 kHz (typ) (%)

0.0005

Package

TSSOP (PW)-14-32 mm² 5 x 6.4

Features

  • Radiation tolerant
    • Single Event Latch-up (SEL) immune to 43MeV-cm2/mg at 125°C
    • ELDRS free to 30krad(Si)
    • Total Ionizing Dose (TID) RLAT for every wafer lot up to 30krad(Si)
  • Supports Defense and Aerospace Applications
    • Controlled baseline
    • One fabrication, assembly, and test site
    • Extended product life cycle
    • Product traceability
    • Outgassing test performed per ASTM E595
  • Ultra-low offset voltage: ±0.25µV
  • Zero drift: ±0.005µV/°C
  • Zero crossover: 140dB CMRR true RRIO
  • Low noise: 7.0nV√Hz at 1kHz
  • No 1/f noise: 140nVPP (0.1Hz to 10Hz)
  • Fast settling: 2µs (1V to 0.01%)
  • Gain bandwidth: 10MHz
  • Supply Voltage: ±1.25V to ±2.75V, 2.5V to 5.5V
  • True rail-to-rail input and output
  • EMI/RFI filtered inputs
  • Radiation tolerant
    • Single Event Latch-up (SEL) immune to 43MeV-cm2/mg at 125°C
    • ELDRS free to 30krad(Si)
    • Total Ionizing Dose (TID) RLAT for every wafer lot up to 30krad(Si)
  • Supports Defense and Aerospace Applications
    • Controlled baseline
    • One fabrication, assembly, and test site
    • Extended product life cycle
    • Product traceability
    • Outgassing test performed per ASTM E595
  • Ultra-low offset voltage: ±0.25µV
  • Zero drift: ±0.005µV/°C
  • Zero crossover: 140dB CMRR true RRIO
  • Low noise: 7.0nV√Hz at 1kHz
  • No 1/f noise: 140nVPP (0.1Hz to 10Hz)
  • Fast settling: 2µs (1V to 0.01%)
  • Gain bandwidth: 10MHz
  • Supply Voltage: ±1.25V to ±2.75V, 2.5V to 5.5V
  • True rail-to-rail input and output
  • EMI/RFI filtered inputs

Description

The OPA4H838-SEP precision amplifier is an ultra-low noise, fast-settling, zero-drift, zero-crossover device that provide rail-to-rail input and output operation. These features and excellent ac performance, combined with only 0.25µV of offset and 0.005µV/°C of drift over temperature, makes the OPA4H838-SEP a great choice for driving high-precision, analog-to-digital converters (ADCs) or buffering the output of high-resolution, digital-to-analog converters (DACs). This design results in excellent performance when driving analog-to-digital converters (ADCs) without degradation of linearity. The OPA4H838-SEP is offered in a TSSOP-14 package. The OPA4H838-SEP is specified from –55°C to +125°C.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request