0
OPA4830
  • OPA4830
  • OPA4830

OPA4830

ACTIVE

Quad, Low-Power, Single-Supply, Wideband Operational Amplifier

Texas Instruments OPA4830 Product Info

1 April 2026 5

Parameters

Architecture

Voltage FB

Number of channels

4

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.8

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

11

GBW (typ) (MHz)

110

BW at Acl (MHz)

280

Acl, min spec gain (V/V)

1

Slew rate (typ) (V/µs)

560

Vn at flatband (typ) (nV√Hz)

9.2

Vn at 1 kHz (typ) (nV√Hz)

9.5

Iq per channel (typ) (mA)

4.25

Vos (offset voltage at 25°C) (max) (mV)

8

Rail-to-rail

In to V-, Out

Rating

Catalog

Operating temperature range (°C)

-40 to 85

CMRR (typ) (dB)

80

Input bias current (max) (pA)

10000000

Offset drift (typ) (µV/°C)

30

Iout (typ) (mA)

75

2nd harmonic (dBc)

60

3rd harmonic (dBc)

59

Frequency of harmonic distortion measurement (MHz)

5

Package

TSSOP (PW)-14-32 mm² 5 x 6.4

Features

  • High bandwidth:
    • 230MHz (gain = +1)
    • 100MHz (gain = +2)
  • Low supply current: 4.4mA/ch (VS = 5V)
  • Flexible supply range:
    • Dual supply: ±1.5V to ±5.5V
    • Single supply: 3V to 11V
  • Input range includes ground on single supply
  • 4.91V output swing on 5V supply
  • High slew rate: 560V/µs
  • Low input voltage noise: 9.2nV/√Hz
  • Available in a TSSOP-14 package
  • High bandwidth:
    • 230MHz (gain = +1)
    • 100MHz (gain = +2)
  • Low supply current: 4.4mA/ch (VS = 5V)
  • Flexible supply range:
    • Dual supply: ±1.5V to ±5.5V
    • Single supply: 3V to 11V
  • Input range includes ground on single supply
  • 4.91V output swing on 5V supply
  • High slew rate: 560V/µs
  • Low input voltage noise: 9.2nV/√Hz
  • Available in a TSSOP-14 package

Description

The OPA4830 is a quad, low-power, single-supply, wideband, voltage-feedback amplifier designed to operate on a single 3V or 5V supply. Operation on ±5V or +10V supplies is also supported. The input range extends less than the negative supply and to within 1.8V of the positive supply. Using complementary common-emitter outputs provides an output swing to within 220mV of either supply while driving 150Ω. High output drive current (±80mA) and low differential gain and phase errors also make this amplifier an excellent choice for single-supply consumer video products.

Low distortion operation is specified by the high gain bandwidth product (110MHz) and slew rate (560V/µs), making the OPA4830 an excellent input buffer stage to 3V and 5V CMOS analog-to-digital converters (ADCs). Unlike other low-power, single-supply amplifiers, distortion performance improves as the signal swing is decreased. A low 9.2nV/√Hz input voltage noise supports wide dynamic range operation.

The OPA4830 is available in an industry-standard, quad pinout TSSOP-14 package.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request