0
OPA140A-DIE
  • OPA140A-DIE

OPA140A-DIE

ACTIVE

11-MHz, low-noise 36-V JFET precision operational amplifier with rail-to-rail output

Texas Instruments OPA140A-DIE Product Info

1 April 2026 5

Parameters

Number of channels

1

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

36

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

4.5

Vos (offset voltage at 25°C) (max) (mV)

0.12

Offset drift (typ) (µV/°C)

0.35

Input bias current (max) (pA)

10

GBW (typ) (MHz)

11

Slew rate (typ) (V/µs)

20

Rail-to-rail

In to V-, Out

Iq per channel (typ) (mA)

1.8

Vn at 1 kHz (typ) (nV√Hz)

5.1

CMRR (typ) (dB)

140

Rating

Catalog

Operating temperature range (°C)

to

Iout (typ) (A)

0.03

Architecture

FET

Input common mode headroom (to negative supply) (typ) (V)

-0.1

Input common mode headroom (to positive supply) (typ) (V)

-3.5

Output swing headroom (to negative supply) (typ) (V)

0.2

Output swing headroom (to positive supply) (typ) (V)

-0.2

THD + N at 1 kHz (typ) (%)

0.00005

Package

DIESALE (TD)-—-See data sheet

Features

  • Very Low Offset Drift
  • Very Low Offset
  • Low Input Bias Current
  • Very Low 1/f Noise
  • Low Noise
  • Slew Rate
  • Low Supply Current
  • Input Voltage Range Includes V– Supply
  • Single-Supply Operation: 4.5 V to 36 V
  • Dual-Supply Operation: ±2.25 V to ±18 V
  • No Phase Reversal
  • Very Low Offset Drift
  • Very Low Offset
  • Low Input Bias Current
  • Very Low 1/f Noise
  • Low Noise
  • Slew Rate
  • Low Supply Current
  • Input Voltage Range Includes V– Supply
  • Single-Supply Operation: 4.5 V to 36 V
  • Dual-Supply Operation: ±2.25 V to ±18 V
  • No Phase Reversal

Description

The OPA140A operational amplifier is a low-power JFET input amplifier that features good drift and low input bias current. The rail-to-rail output swing and input range that includes V— allow designers to take advantage of the low-noise characteristics of JFET amplifiers while also interfacing to modern, single-supply, precision analog-to-digital converters (ADCs) and digital-to-analog converters (DACs). The OPA140A runs on a single 4.5-V to 36-V supply or dual ±2.25-V to ±18-V supplies.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request